Brocade Communications Systems IP250 FC Ports properties Identifier The identifier of the port

		IP device properties	E
Field/Component	Description
FC Ports properties	•	Identifier — The identifier of the port.
	•	Name — The name of the port. This is an editable field. Enter a
	•	name (up to 64 characters) for the port.
		WWN — The world wide name of the device.
	•	FC Address — The Fibre Channel address. Each FC port has both an
	•	address identifier and a world wide name.
		Status — The operational status.
	•	Additional Info — Additional information about the port.
	•	Calculated Status — The calculated operational status. There are
		four possible operation status values (Up, Down, Disabled , or
	•	Backup Active).
		State — The state for the port.
	•	Blocked — The configuration of the switch (blocked or unblocked).
	•	Type — The port type.
	•	Locked Type — The port type of the locked product.
		NOTE: Offline ports of a Network OS device in AG mode are
	•	displayed as N_Port.
		Speed (Gbps) — The speed of the port.
	•	Buffers Desired — The number of buffers desired but not allocated.
	•	Buffers Allocated — The number of buffers allocated.
	•	Distance Actual (km) — The actual distance (in km) for -end port
	•	connectivity.
		Distance Estimated (km) — The estimated distance (in km) for -end
	•	port connectivity.
		Distance setting — Whether the connection is considered to be
	•	normal or longer distance.
		Attached Switch — The IP address of the attached device.
	•	Attached Port # — The port number of the attached product.
	•	Connected Devices — The WWN for each connected device.
	•	NPIV Status — Whether NPIV is enabled or disabled on the port.

Brocade Network Advisor IP User Manual	1325
53-1003056-01