Brocade Communications Systems IP250 user manual Adding thresholds, State Change threshold

Adding thresholds 20

State Change threshold

NOTE

This threshold is only available for Fabric OS devices running 6.3 or later.

Use this type of threshold to block a port when a state change violation type meets the Fabric OS switch threshold.

For 4 Gbps Router, Extension Switches and Blades only, when you apply this threshold on an E Port, the threshold is also applied to the VE Ports (internally by Fabric OS).

Adding thresholds

NOTE

Only available for Fabric OS products.

NOTE

This feature requires a Trial or Licensed version.

The Management application allows you to create Invalid CRCs, Invalid words, Link, Link Reset, Protocol Error, Security, and Sync Loss thresholds.

Adding a C3 Discard Frames threshold

NOTE

This threshold is only available for Fabric OS devices running 6.3 or later.

Use to block a port when a C3 Discard Frames violation type meets the Fabric OS switch threshold. For default threshold values for Fabric OS devices, refer to Chapter 7 of the Fabric Watch Administrator's Guide.

To add an C3 Discard Frames threshold, complete the following steps.

1.Select Monitor > Fabric Watch > Port Fencing. The Port Fencing dialog box displays (Figure 243).

Brocade Network Advisor IP User Manual	677
53-1003056-01