Manuals / Brocade Communications Systems / Computer Equipment / Network Hardware

Brocade Communications Systems IP250 user manual Viewing iSCSI Properties dialog box

Models: IP250

1 1753

Download 1753 pages 4.1 Kb

Page 1359

			Viewing SAN device properties	E

Field	Description

Operational Status	The operational status of the product.

OS Type	The operating system.

Protocol	The LUN protocol.

Size (GB)	The total size of this LUN’s storage, in gigabytes.

State	The state of the LUN.

Storage LUN ID	The storage product’s LUN ID number for this LUN.

Storage Ports	The total number of storage ports assigned to the server or the port, or
	bound to the LUN.

Type	The level or type of RAID storage. Possible values are as follows:
	• 0.		Striped disk array without fault tolerance.
	•	1.	Mirroring and duplexing.
	•	2.	Hamming code ECC.
	•	3.	Parallel transfer with parity.
	•	4.	Independent data disks with shared parity disk.
	•	5.	Independent data disks with distributed parity blocks.
	•	6.	Independent data disks with two independent distributed parity
	•	schemes.
	•	7. Optimized asynchrony for high I/O rates as well as high data
	•	transfer rates.
	•	10. Very high reliability combined with high performance.
	•	53. High I/O rates and data transfer performance.
	•	0+1. High data transfer performance.
Total (Count)	All LUNs, whether assigned or not, that currently exist on this storage
	device.

Total (Size GB)	The total amount of storage space on the storage device, in gigabytes.

Unique LUN ID	Identifies the unique LUN identifier.

Volume State	The volume state of the LUN.

Add button	Click to add a user-defined property. For more information, refer to
	“Adding a property field” on page 1329.

Edit button	Click to edit a user-defined property. For more information, refer to
	“Editing a property field” on page 1330.

Delete button	Click to delete a user-defined property. For more information, refer to
	“Deleting a property field” on page 1330.

4. Click OK on the Properties dialog box to close.

Viewing iSCSI Properties dialog box

NOTE

Only available for Fabric OS products.

The iSCSI Properties dialog box displays information related to iSCSI. To view the properties for an iSCSI device, complete the following steps.

Brocade Network Advisor IP User Manual	1307
53-1003056-01

Image 1359

Brocade Communications Systems IP250 user manual Viewing iSCSI Properties dialog box

Contents

Brocade Network Advisor Title Publication number Summary of changes Date Brocade Communications Systems, IncorporatedTitle Publication number Summary of changes Date 53-1003056-01 Contents Chapter Discovery Installing a patch Uninstalling a patchVii 111 Configurable preferencesManagement groups overview Displaying Network Object view182 Viewing configured usersUsers overview 181Dashboard toolbar Accessing a dashboardSetting the dashboard display Dashboard overview53-1003056-01 Host Product List toolbar IP tab overviewIP main toolbar Product List toolbar344 Viewing Call Home configurationsCall Home overview System requirementsLaunching an Telnet session from the IP tab About third-party toolsStarting third-party tools from the application Launching a Telnet sessionLaunching the SMC on Windows Wireless management overviewWireless devices Server Management Console overviewEthernet Fabrics view management VCS mode typesLogical chassis cluster mode discovery VCSConverged Network Adapters Host managementBrocade adapters Host Bus Adapters481 This chapterViewing existing PBR policies Adding policies from saved configurationsTelemetry overview Policy-based routingCreating a Layer 2 ACL from a saved configuration Layer 2 access control list managementIronWare Layer 2 ACL configuration Fabric OS Layer 2 ACL configurationOffline zoning Scheduling a security configuration deploymentZoning overview Online zoning671 Chapter Port Fencing723 Chapter IP Element Manager765 743807 CLI configuration overview777 778Adding or modifying dual mode ports Default VlanRemote Switched Port Analyzer Configuration requirements for Vlan Manager843 Mpls pre-configurationVIP Servers overview VIP Server functions917 Chapter SSL Certificates for ServerIron Products Xxx 53-1003056-01 Chapter Power Center Chapter Policy Monitor Fault Management Chapter Technical Support This chapter 1213 Configuring packet capturesReports 1277 Dashboard main menus 1261 IP main menus IP shortcut menusLink incident events Product status eventsThis appendix Database tables and fields1371 Xxxviii 53-1003056-01 Xxxix Wirelessinterface Wiredinterface Ceeportinfo About This Document This chapterHow this document is organized Xliv 53-1003056-01 Fabric OS hardware and software support Supported hardware and softwareIronWare hardware and software support Xlvii Xlviii 53-1003056-01 Xlix Network OS hardware and software support What’s new in this document Bold text Document conventionsText formatting Key termsThese references are made for informational purposes only Additional informationBrocade resources Other industry resourcesDocument feedback Getting technical helpUser interface components Getting StartedManagement server and client Management server and client Logging into a serverClearing previous versions of the remote client Launching a remote clientLaunching the Configuration Wizard 53-1003056-01 53-1003056-01 Viewing active sessions Select Server Active SessionsActive Sessions dialog box displays Figure Select Server Server Properties Disconnecting usersViewing server properties To disconnect a user, complete the following stepsField/Component Description Viewing port statusManagement server and client Server Properties Click Close to close the Server Properties dialog boxServer and client ports Tftp UDP TCP4431,2 Https server Json Menu Item or Function Keyboard Shortcut Accessibility features for the Management applicationAccessibility features for the Management application Keyboard shortcutsOptions dialog box displays Setting the look and feelLook and feel customization Select Server OptionsConnecting to the database using pgAdmin PostgreSQL databaseChanging the font size Selecting File Add Server PostgreSQL databaseSuse Odbc Data Source Administrator dialog box displaysClick the System DSN tab Click Add Linux version RedHat Package Manager fileSave and close the odbcinst.ini file Installing the Odbc driver on Linux systemsOn the Setup psqlODBC screen click Next Adding the Datasourse on Linux systemsSelect the Connect to an existing database option Testing the connection on Linux systemsExecuting SQL queries from the CLI On the Select database screen, complete the following stepsChanging the database user password Supported open source software productsOpen Source Software License Type HP Software Development KIT License Agreement LgplBSD IreasoningOpen Source Software License Type Supported open source software products Installing a patch PatchesExecute the patch file for your operating system Uninstalling a patch 53-1003056-01 Uninstalling a patch Discovery IP discovery overview IP discovery overview53-1003056-01 Ietf standard MIB name Required MIB object Data collected Configuration requirementsDiscovery of IPv6 addresses MIB supportMIB-II IF-MIBBRIDGE-MIB Ietf standard MIB name Required MIB object Data collected VDX/VCS discovery ENTITY-MIBIP-MIB 1000000533516242 Network OS discovery IP address formatVCS in-band management interface discovery Mapping VCS in-band managementSelect File Save Standalone discoveryVCS fabric discovery VCS fabric rediscoverySeed switch failover VCS fabric split and mergeNetwork OS 2.0 device limitations Logical chassis cluster mode discovery Discover Setup IP dialog box before removal of node How the Management application handles a cluster mode change HyperEdge stack discovery Configuring IP profile discoveryDiscover Setup IP dialog box displays HyperEdge stack discoveryClick the Global Settings tab Configuring IP profile discoveryAdding SNMPv1 and SNMPv2c credentials Configuring IP simple discoveryConfiguring IP simple discovery IP Snmp credentialsClick the Snmp tab IP Snmp credentialsAdding SNMPv3 credentials HMACMD5 HmacshaCBC-DES Editing SNMPv1 and SNMPv2c credentials Editing SNMPv3 credentials Deleting Snmp credentials from the list Reordering Snmp credentials in the listAdding user credentials Default IP user credentialsDefault IP user credentials 53-1003056-01 Editing enable prompt user credentials Editing login prompt user credentialsTo edit an enable super user, complete the following steps Editing enable super user credentialsDeleting user credentials from the list Reordering user credentials in the listClick the OID Filter tab IP Object identifier filtersIncluding product types IP Object identifier filtersProduct sysObjectID Vendor Excluding product typesClick the Preferences tab Defining global setting preferencesDefining global setting preferences Deleting product types from the list53-1003056-01 Reduce the managed count by completing the following steps Configuring event-based collection53-1003056-01 Configuring a discovery profile IP discovery profilesIP discovery profiles Duplicating a discovery profile Configuring address ranges Select Cidr Subnet from the Entry Type list Adding Cidr subnet addressesAdding IP addresses Adding subnet addressesExcluding subnet addresses Excluding Cidr subnet addressesExcluding IP addresses Editing address rangesEditing Cidr subnet addresses Editing subnet addressesEditing IP addresses Scheduling discovery Configuring an hourly discovery schedule Configuring a one-time discovery scheduleConfiguring a weekly discovery schedule Configuring a daily discovery scheduleConfiguring a yearly discovery schedule Configuring a monthly discovery scheduleSuspending a discovery schedule Editing a discovery scheduleTo edit a discovery schedule, complete the following steps Editing a weekly discovery schedule Editing a one-time discovery scheduleEditing an hourly discovery schedule Editing a daily discovery scheduleConfiguring advanced discovery profile preferences Editing a monthly discovery scheduleEditing a yearly discovery schedule IP discovery profiles Deleting a discovery profile Creating a discovery address fileStarting discovery manually To view discovery status, complete the following steps Starting discovery automaticallyStopping discovery Viewing discovery statusMailing discovery reports Viewing discovery reportsExporting discovery reports Viewing the discovery logClick Discovery Log Individual IP device discovery Adding an IP device to discoveryIndividual IP device discovery HMACMD5 Click the SNMPv1/v2c Read/Write tab Click the SNMPv3 Read Only tabEditing IP device discovery Click the SNMPv1/v2c Read Only tabClick the Read/Write Credentials tab Click the SNMPv3 Read/Write tab Click the SNMPv1/v2c Read/Write. tab Click the SNMPv1/v2c Read Only tab Click the Port Config Credentials tab 53-1003056-01 Select Discover Host Adapters Host discoveryDeleting IP devices from discovery Discovering Hosts by Network address or host nameHost discovery Click Close on the Discover Host Adapters dialog box Importing Hosts from a CSV fileHost discovery Importing Hosts from a Fabric Importing Hosts from a VM manager Host discovery To edit Host credentials, complete the following steps Editing Host adapter credentialsClick Discover Removing a host from active discoveryRediscovering a previously discovered fabric Deleting a host adapter from discoveryTroubleshooting host discovery Viewing the host discovery stateIconDescription Select Discover VM Managers VM Manager discoveryVM Manager discovery requirements Discovering a VM managerVM Manager discovery Clear to disable vSphere client plug-in registrationEditing a VM manager Click Close on the Discover VM Managers dialog boxTo edit VM manager discovery, complete the following steps Rediscovering a previously discovered VM manager Excluding a host from VM manager discoveryIncluding a host in VM manager discovery Removing a VM manager from active discoveryViewing the VM manager discovery state Deleting a VM manager from discoveryTroubleshooting VM manager discovery IP RediscoveryRediscovering IP devices Click Rediscover Rediscovering IP devices from the Product ListRediscovering a group Enabling password validation on rediscoveryManagement Groups Management groups overviewDisplaying Network Object view Product group overview Creating a static product group Static product groupsProduct group overview Editing a static product groupDuplicating a static product group Creating a dynamic product group Dynamic product groupsUserdefinedproperty1 up to Select Value or Regular Expression from the Type list Duplicating a dynamic product group Editing a dynamic product groupViewing product group properties Viewing test resultsProduct Group Properties dialog box displays Performance list Click OK to close the dialog boxProperties tab Products tabPort Groups Port GroupsDeleting a product group Creating a port groupEditing a port group Duplicating a port group Ports tab Viewing port group propertiesDeleting a port group Configurable preferences Application ConfigurationServer Data backup Select Server Backup in the Category list What is backed up?Management server backup Configuring backup130 53-1003056-01 Enabling backup Clear the Enable Backup check box Click Apply or OK Disabling backupViewing the backup status Changing the backup intervalStarting immediate backup Reviewing backup eventsSelect Server Backup in the Category list Click Backup Now Restoring data Server Data restoreRestoring data to a new server SAN data collection136 53-1003056-01 Product communication protocols IcmpSnmp FTP NetconfTo configure event storage, complete the following steps Event storage settingsConfiguring event storage Event storage settings Product communication protocolsSelect Event Storage in the Category list Flyover settingsConfiguring flyovers Storing historical events purged from repositoryOptions dialog box Flyovers pane, Connection tab Properties tableName settings Turning flyovers on or offViewing flyovers Select Configure Names Fixing duplicate namesClick Fix Duplicates Name settings Select one of the following options Configure Names dialog box displays FigureViewing names Adding a name to an existing device Adding a name to a new device Applying a name to a detached WWNClick Apply Names Click Export Removing a name from a deviceEditing names Exporting namesClick Import Importing NamesSearching for a device by name To import names, complete the following stepsSearching for a device by WWN Miscellaneous security settingsConfiguring the server name Configuring login securitySelect Security Misc in the Category list Registering a server as a Syslog recipient automatically Syslog Registration settingsConfiguring the login banner display Disabling the login bannerSnmp Trap Registration settings Configuring the Syslog listing port numberRegistering a server as a Snmp trap recipient automatically Snmp Trap forwarding credential settings Snmp Trap forwarding credential settingsConfiguring the Snmp trap listing port number Configuring Snmp v1 and v2c credentialsConfiguring Snmp v3 credentials Software Configuration Configuring the server IP addressClient/Server IP 156 53-1003056-01 Configuring an explicit server IP address Click OK on the Login Banner Configuring the application to use dual network cardsSoftware Configuration You can configure the following preferences for IP productsIP preferences Configuring change manager preferences Configuring custom report preferences Configuring deployment preferencesConfiguring deployment report preferences Configuring Mpls polling service preferences Configuring IP device manager preferencesConfiguring image repository preferences Configuring Mpls management preferencesConfiguring sFlow data collector preferences Configuring name service preferencesConfiguring polling service preferences Configuring sFlow accounting preferencesConfiguring SSL certificates preferences Configuring sFlow monitoring preferencesConfiguring Snmp preferences Configuring syslog file reader preferencesConfiguring Tftp preferences Configuring memory allocation settings Memory allocation settingsServer Heap Size Configuring asset polling Product communication settings Configuring SAN communicationViewing the network size status Configuring the preferred IP format Select the Connect using Http optionSelect the Connect using Https Http over SSL only option Configuring IP communication Http FTP/SCP/SFTP server settingsConfiguring an internal FTP server Accessing the FTP server folderConfiguring an internal SCP or Sftp server Select the Use External FTP Server and/or SCP Server option Configuring an external FTP, SCP, or Sftp serverSelect FTP/SCP/SFTP in the Category list Testing the FTP, SCP, and Sftp serverSelect SCP from the Preferred Protocol Secured list Select Sftp from the Preferred Protocol Secured listServer port settings Configuring the server portTo configure server settings, complete the following steps Options dialog box displays Figure Support mode settingsConfiguring support mode settings Select Support Mode in the Category listConfiguring the server log file purge limit Fips Support Users overview User Account ManagementUsers dialog box displays Click the Users tab, if necessary Viewing configured usersTo view configured users, complete the following steps Select Server Users183 184 53-1003056-01 To create a new user account, complete the following steps User accountsCreating a new user account User accounts186 53-1003056-01 Copying a user account Editing a user accountCopying and pasting user preferences Disabling a user account To re-activate a user account, complete the following steps Enabling a user accountDeleting a user account Unlocking a user accountTo create a new role, complete the following steps RolesCreating a new role RolesCopying a role Editing a roleDeleting a role Adding privileges to a roleTo delete a role, complete the following steps Areas of responsibility Removing privileges from a roleAreas of responsibility Creating an AOR Copying an AOR Editing an AORAssigning products to an AOR Deleting an AORUsers dialog box displays Click the Policy tab Password policiesConfiguring a password policy Removing products from an AOR199 Viewing password policy violators Click View Policy Violators Authentication Server Groups on the Management serverClick the Authentication Server Groups tab Assigning roles and AORs to an AD groupRemoving roles and AORs from an AD group Loading an AD groupTo load an AD group, complete the following steps Close the Active Directory Users and Computers dialog box Deleting an AD groupCreating an AD user account Open the Active Directory Users and Computers consoleConfiguring roles and AORs on the external Ldap server Assigning an AD user to an AD groupDefining user accounts on the external Ldap server User profiles Click OK Close the Management consoleSelect Start Run Type adsiedit.msc and press Enter Click OK on the User Profile dialog box User profiles Configure CLI credentialsViewing your user profile Select Server User ProfileTo edit your user profile, complete the following steps Changing your passwordEditing your user profile User profilesTo view your password policy, complete the following steps Viewing your password policyClick Optional Messages Reset Resetting optional messagesConfiguring e-mail notification Configuring CLI credentialsConfiguring the CLI credential policy Dashboard overview Dashboard Management212 53-1003056-01 Toolbar Dashboard toolbarDashboards expand navigation bar Dashboard messagesGeneral dashboard functions Accessing a dashboardCreating a user-defined dashboard Filtering the dashboards listSetting the dashboard display Deleting a user-defined dashboardCustomizing the dashboard widgets and monitors 218 53-1003056-01 Exporting the dashboard display Printing the dashboard displayAttaching and detaching the Dashboard tab Setting the network scope Creating a customized network scope Setting the data display time frame Editing a user-defined network scopeDeleting a user-defined network scope Default dashboards Product Status and Traffic dashboardIP Port Health Access Point Status widget Status widgetsStatus widgets Color Type Customizing the Access Point Status widgetColorSeverity Events widgetCustomizing the Events widget Accessing additional data from the Events widgetCustomizing the Host Adapter Inventory widget Host Adapter Inventory widgetIP Inventory widget Customizing the IP Inventory widget Accessing additional data from the IP Inventory widgetIP Status widget IP Status widget displays the device status as a pie chartViewing additional IP product data Accessing additional data from the IP Status widgetFabric Watch widgets Status widgetFabric Watch widgets Out of Range Violations widget Customizing the Out of Range Violations widget Port Health Violations widgetCustomizing the Port Health Violations widget Accessing additional data from the widget Performance monitorsMonitor title Description Data collectors Performance monitors Preconfigure performance monitors Displaying monitors on the Performance DashboardClick the Customize Dashboard icon Top Port Alignment Errors monitor Accessing additional data from top or bottom port monitorsPerformance monitors Click OK Performance monitors Top Port C3 Discards monitorTop Port C3 Discards RX to monitor Top Port CRC Errors monitor 243 Top Port Discards monitor Accessing additional data from the Top Port Discards monitor Top Port Encode Error Out monitorTop Port Errors monitor Top Port Errors monitorAccessing additional data from the Top Port Errors monitor Top Port Overflow Errors monitor Top Port Receive EOF monitor Top Port Runtime Errors monitorTop Port Sync Losses monitor Top Port Too Long Errors monitor Top Port Traffic monitor Accessing additional data from the Top Port Traffic monitor Top Port Underflow Errors monitorTop Port Utilization Percentage monitor 255 Bottom Port Utilization Percentage monitor Top Product CPU Utilization monitor Top Product Memory Utilization monitor Top Product Response Time monitor Top Product Temperature monitor 261 Top Products with Unused Ports monitor Editing a preconfigured performance monitor User-defined performance monitors Monitor typesMeasures Top or bottom product performance monitors Top or bottom port performance monitors Distribution performance monitors Port measures types User-defined performance monitorsTime series performance monitors Accessing additional data from the Distribution monitorsAdd Performance Dashboard Monitor dialog box displays Configuring a user-defined product performance monitorAccessing additional data from the sFlow monitors Top sFlows performance monitors271 Click OK on the Add Performance Dashboard Monitor dialog box Adding targets to a user-defined performance monitorPerformance Dashboard Monitor Targets dialog box displays Configuring a user-defined port performance monitor274 53-1003056-01 MAC Vlan Configuring a user-defined sFlow performance monitorViewing product distribution data details Viewing port distribution data details Configuring a monitor from a performance graph Utilization Legend View ManagementIP tab overview Main toolbar IP main toolbarProduct List toolbar Topology Map toolbar Host Product List toolbarIP Product List Host topology map toolbarProduct List functions Topology Map286 53-1003056-01 Master Log IP tab overview Topology keyboard shortcutsKeyboard Shortcut Description Anchoring or floating the Minimap MinimapResizing the Minimap Status barIP product icons Icon legendCNA Host product iconsIcon legend VlanEvent icons IP group iconsIP port icons IP product status iconsCustomizing the main window Customizing the main windowZooming in and out of the Connectivity Map ZoomingDisplaying columns Exporting the topologyCustomizing application tables Zooming outChanging the order of columns Exporting table information Resizing the columnsSorting table information Copying table informationExpanding and collapsing tables Product List customizationAdding a property label Searching for information in a tableDeleting a property label Editing a property labelSearching for a device SearchRestricting a search by node Address Finder Address FinderSearching for an exact match Clearing search resultsFinding IP addresses Select Tools Address FinderAddress Finder dialog box displays 303 Finding MAC addresses 305 IP topology view manager Network Object view functions Network Objects viewFiltering devices in the Network Objects Product List Clearing the Network Objects Product List filterNetwork Objects view IP Topology view L2 Topology viewIP Topology view Ethernet Fabrics view Ethernet Fabrics viewVlan Topology view STP/RSTP topologyElementDescription Viewing STP/RSTP topologyElement Description Generating an STP/RSTP ReportExporting an STP/RSTP Report Vlan Topology view STP/RSTP Topology map elementsHost Topology view Mailing an STP/RSTP ReportHost Topology view Click Save 314 53-1003056-01 IP topology map components Topology map elementsIP topology map components Icon Description Products LogicalConnections Topology map layout Viewing flyovers on the topology mapOrthogonal OrganicHierarchical Orthogonal Merge LinesSelecting a topology map layout CircularFree Form Creating a customized layout Creating customized topology links Customizing the Topology Map Adding a background image to a map Click OK on the Topology Background Map dialog box Deleting a background image from the librarySelect Portrait or Landscape from the Orientation area Printing a mapEnabling port actions Port actionsDisabling port actions Displaying port properties for an attached devicePort actions Accessing performance monitoring 330 53-1003056-01 MRP Topology overview MRP TopologyViewing a MRP Topology map Master Viewing a MRP ringViewing a MRP ring MRP Topology map elements ErrorSelecting a topology map layout Configuring the application to show a dashed line336 53-1003056-01 337 Creating a customized layout Customizing the MRP Topology map Click the Starting Point rowEnter the ring ID, for example, Ring Refreshing MRP Topology data Viewing MRP propertiesClick Close on the MRP Topology Options dialog box 341 Viewing MRP properties Call Home Call Home System requirements Viewing Call Home configurations346 347 To show a Call Home center, complete the following steps Showing a Call Home centerHiding a Call Home center Showing a Call Home centerEditing a Call Home center Editing the IBM Call Home centerClick Edit Centers beneath the Call Home Centers list Click Edit Centers beneath the Call Home Centers table Backup Connection fieldEditing an e-mail Call Home center Primary Connection fieldEnter a password in the Smtp Server Settings Password field Enter a user name in the Smtp Server Settings Username fieldCall Home alert e-mail messages  Fcip Editing the EMC Call Home center Editing the HP LAN Call Home center To enable a Call Home center, complete the following steps Enabling a Call Home centerEnabling supportSave Select Monitor Event Notification Call Home Testing the Call Home center connectionTesting the Call Home center connection Disabling a Call Home centerViewing Call Home status Viewing Call Home statusAssigning a device to the Call Home center Assigning a device to the Call Home centerRemoving a device from a Call Home center Removing all devices and filters from a Call Home centerDefining an event filter To define an event filter, complete the following stepsClick OK on the Call Home Event Filter dialog box Assigning an event filter to a Call Home center Assigning an event filter to a deviceAssigning an event filter to a Call Home center Overwriting an assigned event filter Removing all event filter from a Call Home centerOverwriting an assigned event filter Removing an event filter from a device Searching for an assigned event filterRemoving an event filter from a device Searching for an assigned event filter Third-party tools About third-party toolsStarting third-party tools from the application Select Tools Product Menu ToolName Launching a Telnet sessionLaunching an Element Manager Launching an Telnet session from the IP tabAdding a tool Select Configure Element Manager HCM. HCM Agent displaysSelect Tools Setup Launching HCM AgentEntering the server IP address of a tool Adding an option to the Tools menu Removing an option from the Tools menu Changing an option on the Tools menuAdding an option to a device’s shortcut menu Changing an option on a device’s shortcut menu Removing an option from a device’s shortcut menu 374 53-1003056-01 Server Management Console Server Management Console overviewLaunching the SMC on Windows Launching the SMC on Linux Services tabMonitoring and managing Management application services Services tabClick Stop Cimom Stopping all servicesStopping the Cimom services Refreshing the server statusClick Change Database Password Starting all servicesRestarting all services Changing the database passwordViewing server port numbers Ports tabSelect Radius Server from the Primary Authentication list AAA Settings tabConfiguring Radius server authentication AAA Settings tabLocal Database Configuring a Radius serverConfiguring Ldap server authentication Select Ldap Server from the Primary Authentication list Configuring an Ldap server For Primary Authentication, select TACACS+ Server Configuring TACACS+ server authenticationConfiguring a TACACS+ server Configuring Common Access Card authentication Select CAC from the Primary Authentication list For Primary Authentication, select Switch Configuring switch authenticationFor Primary Authentication, select Windows Domain Configuring Windows authenticationAuthentication Audit Trail log displays Configuring local database authenticationDisplaying the client authentication audit trail For Primary Authentication, select Local DatabaseCapturing technical support information Restore tabTechnical Support Information tab Restoring the databaseHCM Upgrade tab To upgrade HCM, complete the following stepsUpgrading HCM on the Management server SMI Agent Configuration Tool Select the HCM Upgrade tab SMI Agent Configuration ToolLaunching the Smia configuration tool on Windows SMI Agent Configuration ToolManagement Console dialog box Smia Configuration Tool dialog box Launching the Smia configuration tool on UnixLaunching a remote Smia configuration tool Service Location Protocol SLP supportSmia Configuration Tool dialog box displays Slptool commands SLP file locations on Unix systems SLP on Unix systemsSLP file locations on Windows systems SLP on Windows systemsHome tab Authentication tabAuthentication tab Click the Authentication tabConfiguring Cimom server authentication Cimom tab Configuring the SMI Agent port numberConfiguring the Cimom Bind Network Address Configuring the Cimom log Certificate Management tab To import a certificate, complete the following stepsClick the Certificate Management tab Exporting a certificate Viewing a certificateDeleting a certificate Summary tabSMI Agent Configuration Tool Click the Summary tab Log Level Managed PortsLicensed Ports 412 53-1003056-01 Wireless management overview Wireless ManagementWireless devices Wireless device discoveryDevice Name Firmware required Wireless devices on the dashboard Wireless devices on the dashboardView management Wireless device propertiesView management Element ManagerLaunching the Element Manager Browser and system requirementsLaunching a Telnet session Configuration repository and backup managementSave and close the file CLI configuration managementVlan management Cluster modeFault management Performance managementPolicy Monitors AP Products report Contact StatusFirmware version Location424 53-1003056-01 VCS VCS ManagementFabric cluster mode VCS mode typesThis section contains these topics Logical chassis cluster mode discoveryLogical chassis cluster operations Ethernet Fabrics view management428 53-1003056-01 429 Serial firmware update and activation for Network OS devices Network OS Support for Network OS VDX 2740 embedded switchDynamic product group VCS product groupsPort profiles Static product groupAmpp characteristics Life of a port profilePort profile Vlan profile QoS profile Ampp event Applicable behavior and failures Ampp events and behaviorAssigning MAC addresses to a port profile Port profile configuration using the management applicationClick Add Offline MACs Managing offline MAC addressesRelated topics Click Add Assign MACs dialog box displaysComparing port profiles Profile Comparison Summary dialog box Vlan Settings Profile Comparison Summary listProfile Properties Deploying port profiles QoS SettingsACL Settings FCoE SettingsFRU monitoring System Monitor support on Network OS VDX platformsSystem thresholds Alert notificationsResource monitoring SFP parameter Description Suggested SFP impact SFP parameter monitoringSecurity monitoring Port statistics monitoringInterface error types To diagnose traceroute, you can do either of the following Select Monitor Diagnostics TracerouteEthernet fabric traceroute Tracing Ethernet fabric routesSource address format Condition TCP UDP Request Source port number Destination port number Ethernet fabric traceroute Trace Route exampleBrowse to the directory where you want to save the data Exporting diagnostic data450 53-1003056-01 Host management Host ManagementModel number Description Brocade adaptersHost Bus Adapters Following sections describe the three Brocade adapter typesFabric Adapters Converged Network AdaptersHCM software AnyIOTM technologyHCM software HCM features Click Add on the Discover VM Managers dialog box Host adapter discoveryVM Manager Adding a VM ManagerHCM and Management application support on ESXi systems Deleting a VM ManagerESXi CIM listener ports Add Host Adapters dialog box Adding host adapter credentials for ESXiSelect CIM server ESXi only as the Contact option Select Host Adapter Software from the Configure menuAdapter software Adapter softwareImporting a driver into the repository Driver repositoryDeleting a driver file from the repository Boot image repositoryBoot Image Management dialog box Importing a boot image into the repositoryClick Import on the Boot Image Repository dialog box Downloading a boot image to a selected hostBacking up boot image files Bulk port configurationConfiguring host adapter ports Deleting a boot image from the repositoryAdd Port Configuration dialog box, shown in , displays Adding a port configurationBulk port configuration Click Add on the Configure Host Adapter Ports dialog box466 53-1003056-01 Adapter Port Configuration Status dialog box displays Deleting a port configuration Configuring FAWWNs on switch portsEditing a port configuration Duplicating a port configurationClick Start to save the changes to the switch Enabling the Fawwn feature on a switch or AG portsDisabling the Fawwn feature on a switch or AG ports Select Configure Fabric Assigned WWN. orAuto-assigning a Fawwn to a switch or AG port Manually assigning a Fawwn to a switch or AG portModifying a Fawwn on a switch or AG port FAWWNs on attached AG ports Deleting a Fawwn from a switch or AG portClick the Attached AG Ports tab Moving an AG port Fawwn across switchesAdding AG port FAWWNs Deleting AG port FAWWNsHost adapter management privileges Role-based access controlHost adapter administrator privileges Role-based access controlFC port measures HBA port measures CNA port measures Host performance managementHost security authentication Counters Host security authenticationHost security authentication Host fault management SupportSave on adaptersAdapter events Host fault management Filtering event notificationsSyslog forwarding Backup support Configuring backup to a hard driveSelect the Include FTP Root directory check box Select the Enable Backup check box Click Apply or OK FCoE overview Fibre Channel over EthernetEnhanced Transmission Selection Enhanced Ethernet featuresEnhanced Ethernet features Dcbx protocolFCoE protocols FCoE protocols supportedEthernet jumbo frames Ethernet link layer protocols supportedSaving running configurations Copying switch configurations to selected switchesFCoE licensing Saving running configurations Device type Configuration possibilities DCB configuration managementLldp profiles Switch policiesSwitch policies DCB map and Traffic Class mapDCB configuration Minimum DCB configuration for FCoE trafficDCB configuration Creating a DCB map to carry the LAN and SAN traffic Select Configure DCBTo configure LLDP, complete the following steps Configuring LldpTo configure the DCB interface, complete the following steps Select Assign the Global Configuration Select Configure Element Manager AdminCreating the FCoE Vlan to carry FCoE traffic Save the running-config file to the startup-config file Adding a LAGApply the Vlan classifier group to the DCB interface L2 Mode Select Access or Trunk Click Add LAG or Edit LAGAdd LAG or Edit LAG dialog box displays, as shown in Figure Editing a DCB switch Editing a DCB port 497 Editing a LAG 499 Enabling a DCB port or LAG Deleting a LAG QoS configurationPriority group ID Strict priority No bandwidth % configuration AllowedCreating a DCB map Off503 Deleting a DCB map Editing a DCB mapAssigning a DCB map to a port or link aggregation group QoS configurationCreating a Traffic Class map Editing a Traffic Class mapSelect Traffic Class from the Map Type list Deleting a Traffic Class map Select Traffic Class in the Map Type list Changing the Vlan ID on the default FCoE mapFCoE provisioning FCoE provisioningEnabling or disabling the FCoE map on the port Adding a Vlan classifier rule Vlan classifier configurationVlan classifier configuration Deleting a Vlan classifier rule Editing a Vlan classifier ruleDeleting a Vlan classifier group Creating a Vlan classifier groupLLDP-DCBX configuration Configuring Lldp for FCoELLDP-DCBX configuration 515 Deleting an Lldp profile Editing an Lldp profile802.1x authentication 802.1x authenticationAssigning an Lldp profile to a port or ports in a LAG 16 802.1x authentication Enabling 802.1x authenticationDisabling 802.1x authentication Setting 802.1x parameters for a port519 Switch, port, and LAG deployment Deploying DCB product, port, and LAG configurationsSwitch, port, and LAG deployment Deploy to Ports dialog box 522 53-1003056-01 523 Network OS switches in VCS mode Viewing switches in VCS mode Network OS switches in VCS modeSupported VCS platforms Viewing FCoE parameters on the Network OS switch Viewing QoS parameters on the Network OS switchLldp Profiles list Viewing LLDP-DCBX parameters on the Network OS switchAvailable Rules Vlan ClassifiersViewing ports in VCS mode Viewing the 802.1x parameter on the Network OS switchViewing port parameters on the Network OS switch port Viewing QoS parameters on the Network OS switch port QoS DCB parameters on the Network OS switch portQoS-DCB Viewing FCoE parameters on the Network OS switch port QoS non-DCB parameters on the Network OS switch portQoS Non-DCB Viewing the 802.1x parameter on the Network OS switch port Viewing LLDP-DCBX parameters on the Network OS switch portPort Control Viewing LAGs in VCS modeViewing LAG parameters on the Network OS switch LAG Re-authentication Interval secMinimum Links Viewing QoS parameters on the Network OS switch LAGQoS DCB parameters on the Network OS switch LAG TypeQoS non-DCB parameters on the Network OS switch LAG Viewing FCoE parameters on the Network OS switch LAGEnable LLDP-DCBX check box Viewing LLDP-DCBX parameters on the Network OS switch LAGDCB performance DCB performanceReal-time performance graph Generating a real-time performance graph from the SAN tabHistorical performance graph Generating a real-time performance graph from the IP tabGenerating a historical performance graph Historical Performance Graph dialog box displays FCoE login groupsHistorical performance report Generating a historical performance report539 FCoE login groups Adding an FCoE login groupEditing an FCoE login group FCoE login groups Click OKFCoE Login Group Confirmation and Status dialog displays Deleting one or more FCoE login groups Disabling the FCoE login management feature on a switchSelect a group from the Login Groups list and click Delete Viewing virtual FCoE ports Virtual FCoE port configurationEnabling the FCoE login management feature on a switch Virtual FCoE port configurationClearing a stale entry Select the Virtual FCoE Ports tabVirtual FCoE Ports tab displays, as shown in Figure 545 546 53-1003056-01 Telemetry Telemetry overviewPolicy-based routing Viewing existing PBR policies 549 Adding rules to a policy Adding a new policy551 Adding policies from saved configurations Editing a policyEditing a rule Deploying a PBR policy on demand Deleting a policy or ruleSaving a PBR policy deployment Click OK on the Deploy to Products PBR dialog boxSelect Save deployment only Scheduling a PBR policy deployment Configuring an hourly deployment schedule Configuring a one-time deployment scheduleConfiguring a daily deployment schedule Configuring a weekly deployment scheduleConfiguring a monthly deployment schedule Enabling or disabling ACL accounting Resetting ACL countersConfigure Security ACL Accounting ACL AccountingClick OK on the Port Selection Layer 2/3 ACL dialog box Viewing ACL countersSelect the Clear all counters on device check box Port Selection Layer 2/3 ACL dialog box displays560 53-1003056-01 Layer 2 access control list management Security ManagementSecurity overview IronWare Layer 2 ACL configuration Creating a Layer 2 ACL configuration IronWareAdd Layer 2 ACL Configuration dialog box displays MAC Click OK on the Add Layer 2 ACL Configuration dialog box Editing a Layer 2 ACL configuration IronWareCopying a Layer 2 ACL configuration IronWare 566 53-1003056-01 567 Select the Clear ACL Assignment option Clearing Layer 2 ACL assignments IronWareFabric OS Layer 2 ACL configuration Creating a standard Layer 2 ACL configuration Fabric OSDeviceName Layer 2 ACL Configuration dialog box displays Editing a standard Layer 2 ACL configuration Fabric OS Copying a standard Layer 2 ACL configuration Fabric OSClick OK on the Edit Layer 2 ACL Configuration dialog box Select Extended from the Type list Creating an extended Layer 2 ACL configuration Fabric OS572 53-1003056-01 Copying an extended Layer 2 ACL configuration Fabric OS Editing an extended Layer 2 ACL configuration Fabric OS574 53-1003056-01 Clearing Layer 2 ACL assignments Fabric OS Creating a Layer 2 ACL from a saved configuration Deleting a Layer 2 ACL configuration from the applicationDeleting a Layer 2 ACL configuration from the switch Viewing Layer 2 ACL configuration on a fabric Network OS Network OS Layer 2 ACL configurationViewing Layer 2 ACL configuration on a device Network OS Viewing Layer 2 ACL configuration on an interface Network OS Click OK on the Port Selection Layer 2 ACL dialog box Layer 3 access control list policyCreating a standard L3 ACL configuration Add L3 ACL Configuration dialog box displays Layer 3 access control list policyClick OK on the Add L3 ACL Configuration dialog box Creating a L3 ACL from a saved configurationEditing a standard L3 ACL configuration Edit L3 ACL Configuration dialog box displaysClick OK on the Edit L3 ACL Configuration dialog box Click Duplicate Copying a standard L3 ACL configurationCreating an extended L3 ACL configuration Click OK on the Duplicate L3 ACL Configuration dialog box586 53-1003056-01 L3 ACL Advanced Settings dialog box displays Editing an extended L3 ACL configurationCopying an extended L3 ACL configuration 589 Add L3 ACL IPv6 Configuration dialog box displays Creating an IPv6 L3 ACL configurationClick OK on the Add L3 ACL IPv 6 Configuration dialog box Editing an IPv6 L3 ACL configuration Copying an IPv6 L3 ACL configuration Deleting a L3 ACL configuration Assigning a L3 ACL configuration to an interfaceClick OK on the DeviceName L3 ACL Configuration dialog box 595 Clearing L3 ACL assignments Configuring hit statistics Configuring the ACL configuration type and operationsConfiguring L3 ACL advanced settings 599 600 53-1003056-01 3qosp3time-exceeded Network configuration Viewing existing networksTo view all existing networks, complete the following steps Creating a network Layer 3 access control list policy Click the Networks tabEditing a network Deleting a network Copying a networkViewing existing network groups Network group configurationClick the Network Groups tab Creating a network groupReview the List of Network Groups table To create a network group, complete the following stepsTo edit a network group, complete the following steps Editing a network groupTo copy a network group, complete the following steps Copying a network groupClick OK on the Duplicate Network Group dialog box Service configuration Deleting a network groupTo delete a network group, complete the following steps Viewing existing services TCP UDP Creating a serviceCopying a service Editing a serviceDeleting a service Review the List of Service Groups table Service group configurationViewing existing service groups Click the Service Groups tabCreating a service group To create a service group, complete the following stepsClick Add Add Service Group dialog box displays To edit a service, complete the following steps Editing a service groupCopying a service group To copy a service, complete the following stepsClick OK on the Duplicate Service Group dialog box Media Access Control MAC filter management Deleting a service groupMedia Access Control MAC filter management Creating a MAC filter configuration Add MAC Filter dialog box Creating a MAC filter from a saved configuration Editing a MAC filter Click OK on the MAC Filter Saved Configurations dialog boxCopying a MAC filter 626 53-1003056-01 Assigning MAC filters Deleting a MAC filterClearing MAC filter assignments Adding a MAC filter configuration to an interfaceSecurity configuration deployment Security configuration deploymentDeploying a security configuration on demand Click OK on the Deploy to Products Layer 2 ACL dialog box Saving a security configuration deploymentDeploy to Product/Ports dialog box Scheduling a security configuration deploymentSelect an ACL in the list and click Edit Edit Layer 2 ACL Configuration dialog box displays634 53-1003056-01 635 636 53-1003056-01 Zoning overview ZoningGreen Zone Online zoningZoning naming conventions Offline zoningZone database size Zoning configurationConfiguring zoning Zone database sizeCreating a zone Viewing zone propertiesClick New Zone Zoning configuration Select Save to Switch from the Zone DB Operation listAdding members to a zone Creating a member in a zone Removing a member from a zoneClick New Member Renaming a zone Duplicating a zone Deleting a zoneClick Zoning Policies Enabling or disabling the default zone for fabricsSelect Configure Zoning Fabric Customizing the zone member displayCreating a zone alias Editing a zone aliasClick New Alias Removing an object from a zone alias Click Export Alias Exporting zone aliasesRenaming a zone alias Deleting a zone aliasCreating a zone configuration Click New ConfigurationDuplicating a zone alias Zone Configuration Properties dialog box displays Viewing zone configuration propertiesAdding zones to a zone configuration Removing a zone from a zone configurationClick Activate Activating a zone configurationDeactivating a zone configuration Click the Active Zone Configuration tabClick Deactivate Deleting a zone configuration Renaming a zone configurationCreating an offline zone database Duplicating a zone configurationSelect Delete from the Zone DB Operation list Deleting an offline zone databaseRefreshing a zone database Merging fabricsSelect Refresh from the Zone DB Operation list Select Compare from the Zone DB Operation list Merging two zone databasesCreating a common active zone configuration in two fabrics Select an offline zone database from the Zone DB list Saving a zone database to a switchExporting an offline zone database You cannot export an online zone databaseZoning administration Importing an offline zone databaseRolling back changes to the offline zone database To compare two zone databases, complete the following steps Comparing zone databasesManaging zone configuration comparison alerts Clearing the fabric zone database Setting change limits on zoning activationSelect Undo CheckOut from the Zone DB Operation list Removing all user names from a zone databaseFinding a member in one or more zones Select Clear All from the Zone DB Operation listFinding zones in a zone configuration Finding a zone configuration member in the zones listFinding a zone member in the potential member list Listing un-zoned members Listing zone membersRemoving an offline device Replacing zone membersClick OK on the Offline Device Management dialog box Replacing an offline device by name Replacing an offline device by WWN670 53-1003056-01 About port fencing Port FencingAbout port fencing Viewing port fencing configurations673 Thresholds C3 Discard Frames threshold Invalid words threshold Link Reset thresholdProtocol error threshold Invalid CRCs thresholdAdding thresholds Adding thresholdsState Change threshold Adding a C3 Discard Frames thresholdAdd C3 Discard Frames Threshold dialog box displays Port Fencing dialog boxAdd Invalid CRCs Threshold dialog box displays Adding an Invalid CRCs thresholdAdd Invalid Words Threshold dialog box displays Adding an Invalid Words thresholdAdding a Link Reset threshold Add Link Reset Threshold dialog box displays Adding a Protocol Error threshold Select Protocol Error from the Violation Type listAdd Protocol Error Threshold dialog box displays Add State Change Threshold dialog box displays Adding a State Change thresholdAssigning thresholds Avoiding port fencing inheritance Unblocking a portEditing thresholds Editing a C3 Discard Frames thresholdClick OK on the Edit C3 Discard Frames Threshold dialog box Click OK on the Edit Invalid CRCs Threshold dialog box Editing an Invalid CRCs thresholdEditing an Invalid Words threshold Editing thresholdsClick OK on the Edit Invalid Words Threshold dialog box Editing a Link Reset thresholdEditing a Protocol Error threshold Click OK on the Edit Link Reset Threshold dialog boxEditing a State Change threshold Click OK on the Edit Protocol Error Threshold dialog boxFinding assigned thresholds Viewing thresholdsViewing all thresholds on a specific Fabric OS device Removing thresholds from individual objects Removing thresholdsRemoving thresholds from the thresholds table Removing thresholds Ficon Environments Ficon configurationsConfiguring a switch for Ficon operation Planning the configurationConfiguring a switch for Ficon operation 697 Select Discover Fabrics Configuring the switchClick Add License Click Download 701 Configuring an Allow/Prohibit Matrix Configuring Ficon display703 Manual Allow/Prohibit dialog box displays, as shown in on Configuring an Allow/Prohibit Matrix manuallyClick Analyze Zone Conflicts Click Manual Allow/ProhibitClick OK on the Manual Allow/Prohibit dialog box Save As/Duplicate dialog box displays, as shown in on Copying an Allow/Prohibit Matrix configuration707 Confirmation message displays, as shown in on Activating an Allow/Prohibit Matrix configurationDeleting an Allow/Prohibit Matrix configuration Activating an Allow/Prohibit Matrix configurationClearing port names Changing the Allow/Prohibit Matrix displayCascaded Ficon fabric Changing window arrangementConfiguring a cascaded Ficon fabric Cascaded Ficon fabric Enabling DLS Cascaded Ficon fabric merge713 Merging two cascaded Ficon fabrics Set up merge options screen displays TOV Specify the Cable length between switch portsRange is form 10 through 500 km. The default is 50 km Resolving merge conflicts717 To view port groups, complete the following steps Select Configure Port GroupsViewing port groups Port Groups dialog box displays, as shown in onTo edit a port group, complete the following steps Swapping blades Click OK Swapping blades721 722 53-1003056-01 IP Element Manager Element Manager overviewElement Manager CLI Element Manager CLI Accessing the IP Element Manager CLIElement Manager interface overview Accessing the Element Manager interfaceSelect Configure Element Manager GUI Element Manager interface overviewBuild Label Switch propertiesSerial # Port Count727 Properties dialog box Ports tab Element Manager toolbarDisplaying port properties Port Mode Tx PowerRx Power Temperature Tx Bias CurrentComparing physical port properties Comparing physical and virtual port propertiesYou can compare physical and virtual port properties Comparing physical and virtual port properties Status indicator icons SearchTable capabilities Real Time Graph/Table Historical Graph/Table Performance dataReal-time performance monitoring Historical performance monitoringConfigure dialog box Configuring VlanResetting port counters Management Module switchover Enable or DisableChanging the standby Management Module to active MR Switch Over Status dialog box Switch Fabric ModuleConfiguring port mirroring Port mirroringPort mirroring Select Configure Port Mirroring Adding a port to port mirroringEditing a port in port mirroring Configuring sFlow in Element Manager SFlowDeleting a port from port mirroring Web Management interface Accessing the Web Management interfaceSelect Configure Element Manager Web Web Management interfaceElement Manager Front Panel Web Management interface troubleshootingAccessing the IP device front panel Select Configure Element Manager Front PanelConfiguration repository Configuration Repository and BackupConfiguration repository 745 Saving the configuration status 747 Comparing product configurations Viewing the configuration749 Restoring a configuration Searching the configuration repository Exporting a configuration to a text file Configuration deviation Viewing configuration deviation statusChange tracking 754 53-1003056-01 Configuration Snapshots tab displays, as shown in Figure Configuration snapshotsComparing configuration snapshots Configuration snapshots Generating a configuration snapshot report Viewing the pre- and post-configuration snapshot Click Save Snapshot Saving a configuration snapshotSearching the configuration snaphots Scheduling a configuration backup Schedule backup763 Edit Automatic Configuration Backup dialog box displays Disabling a backup scheduleConfiguration requirements IP Configuration WizardDNS PayloadsPayloads Payload name Description Product PayloadsInterface Payloads Creating a payload configurationSelect Configure Configuration Wizard Payload name DescriptionCreating a payload configuration 769 770 53-1003056-01 Don’t Save to Flash or Reload Save to FlashSave to Flash and Reload Configuration dialog box Deployment Schedule pane 773 Select a configuration from the Product Configurations list Duplicating a payload configurationModifying a payload configuration Duplicating a payload configurationModifying a payload configuration Deploying a payload configuration Deleting a payload configurationDeploying a payload configuration CLI configuration overview CLI Configuration Management This chapterSelect Configure CLI Configuration Viewing existing templatesViewing existing templates To create a new configuration, complete the following steps Product configuration templatesCreating a new product configuration Product configuration templates780 53-1003056-01 781 CLI Template dialog box Parameters tab 783 CLI Credentials dialog box Changing product credentialsImporting parameter values into a configuration Select a row in the Parameters table Click Preview Previewing CLI commandsPreviewing CLI commands Different values for each target Same value for each targetCLI command guidelines Copying a product configurationCLI command guidelines Editing a product configuration To test a configuration, complete the following steps Testing a configurationEditing the CLI responses properties file Valid and invalid responses from devicesFailureresponseend Editing the Network OS CLI responses properties fileSuccessresponsestart SuccessresponseendValid and invalid responses from devices Configuration command response validationTo delete a configuration, complete the following steps Deleting a configurationUsing a dash character in CLI Configuration manager Configuration error checkingDeploying a configuration on demand CLI configuration deploymentCreating a monitoring configuration Monitoring configurations796 53-1003056-01 797 Show interface ethernet $portSLOTPORTSlot#/Port# 799 Copying a monitoring configuration Editing a monitoring configuration CLI deployment reports Viewing CLI deployment reportsSelect Reports Product CLI Product CLI Report displays CLI configuration schedulingConfiguring a one-time deployment schedule Configuring an hourly deployment scheduleCLI configuration scheduling Configuring a daily deployment scheduleConfiguring a weekly deployment schedule Configuring a monthly deployment scheduleConfiguring a yearly deployment schedule 806 53-1003056-01 Obtaining software files Image Repository for IP ProductsProducts supporting the image import Boot image managementViewing the list of boot images Products supporting the image importSelect Configure Firmware Management Manually importing boot imagesDeleting boot images from the Management application Deploying boot images to productsSoftware image management Software image managementViewing the list of software images Manually importing software imagesClick OK on the Import Software Image dialog box Automatically retrieving software images from productsDeleting software images from the Management application Right-clickConfiguration Schedule BackupSchedule Backup dialog box displays, as shown in Figure Deploying software images to productsUnified image management Viewing the list of unified imagesUnified image management Import Firmware Image from File dialog box displays Importing unified images into the Management applicationClick OK on the Manual Import Unified Image dialog box Complete the following steps Updating unified imagesDeploying unified images to products Deleting unified images from the Management applicationSerial firmware update and activation for NOS devices Default Vlan Vlan ManagementVlan Manager Remote Switched Port Analyzer Super-aggregated VlanPrivate Vlan Transparent LAN Support Configuration requirements for Vlan ManagerVlan Manager tabs Feature VCS FC mode Logical chassis mode Standalone modeDisplaying a list of VLANs Vlan management in a VCS environmentDisplaying VLANs in the Vlan view 824 53-1003056-01 Displaying VLANs by products 826 53-1003056-01 Adding or modifying port VLANs Port VLANs828 53-1003056-01 Select Configuration Manager Vlan Manager Adding or modifying dual mode portsAssigning DCB ports to a Vlan L2 mode Tagged modeAdding Vlan properties 832 53-1003056-01 Deleting a port Vlan in Product view Modifying port Vlan propertiesDeleting port VLANs from products Deleting a port Vlan in Vlan viewSelect a Save Configuration option Spanning Tree Protocol configurationDeploying Vlan configurations Spanning Tree Protocol configurationConfiguring STP or Rstp on a port Vlan FOS Vlan Mstp Target context STP typeIOS Vlan STP, Rstp STP, RSTP, MstpDeploying an STP configuration on a port Vlan Configuring Mstp on a product Adding an Mstp instance Assigning an Mstp instance to a VlanVlan routing Managing IP addresses on an SVIVlan routing Deploy IP Configuration dialog box Vlan routing Click the Deploy now option Select a Save Configurations optionMpls Management Mpls pre-configurationMpls licensing Mpls Licensed and Configured Products groupMpls overview Configuring LDPLSP Viewing LSP Admin Group information Select Configure Mpls LSPSelect the Admin Groups tab Figure Select the Paths tab Figure Viewing LSP path informationSelect the Rsvp LSPs tab Figure Viewing Rsvp LSP informationRelated topics Mpls overview Viewing saved LSP configurationsLSP Adding an LSP admin groupDuplicating an LSP admin group Editing an LSP admin groupAdding an LSP path Deleting an LSP admin groupYou can edit an LSP path by taking the following steps Editing an LSP pathLSP Delete Path Configuration wizard displays Figure Duplicating an LSP pathDeleting an LSP path Configuring advanced Rsvp LSP settings Admin Groups Selector dialog box 858 53-1003056-01 859 860 53-1003056-01 Rsvp LSP Advanced Settings Fast Reroute tab Bypass LSP Deleting an Rsvp LSP Delete Rsvp LSP Configuration wizard displays FigureEditing an Rsvp LSP Duplicating an Rsvp LSPSelect the saved configuration Click the Duplicate button Editing a saved LSP configurationDuplicating a saved LSP configuration Select the saved configuration Click the Edit buttonSelect Monitor Mpls LSP Topology Deleting a saved LSP configurationSelect the saved configuration Click the Delete button Displaying LSP TopologiesLSP right-click options on the Topology View Mpls Virtual Leased Line VLL overview 868 53-1003056-01 Select Configure Mpls VLL VLL managerViewing VLL instances Status VLL ModeTag Mode To view current saved VLL configurations, do the following Viewing Saved VLL configurationsTo add a new VLL instance do the following Adding or editing a VLL instanceConfiguring devices using the VLL Manager VLL Configuration wizard Port Configuration dialog box VLL Configuration wizard Deploy Target Actions dialog box Deploying target actions using the VLL ManagerVLL configuration wizard Deployment Properties Deploying VLL properties using the VLL ManagerVLL configuration wizard Deployment Schedule dialog box Scheduling deployment using the VLL ManagerReviewing the VLL Manager summary Reviewing the VLL Manager configurationTo edit a VLL instance, do the following Creating a new VLL instance using duplicateEditing a VLL instance Deleting VLL instancesFiltering VLL traffic monitoring Select Monitor Mpls VLLVLL Monitor Dialog box displays Figure VLL Virtual Private LAN Services Vpls overview883 Vpls Manager Select Configure Mpls VplsVpls Manager Viewing Vpls instances and peer topologiesEndpoint settings PE Devices Vpls settingsVpls Manager Peer Topology tab To view current Vpls configurations, do the following Viewing Saved Vpls configurationsAdding or editing a Vpls instance Vpls Configuration wizard Device Configuration dialog box Configuring devices using the Vpls ManagerRow is added to the Configured Endpoint Settings list Configuring endpoint settingsDeployment Properties page displays Figure Deploying target actions using Vpls ManagerVpls Configuration wizard Deployment Properties dialog box Deploying Vpls properties using Vpls ManagerVpls Configuration wizard Deployment Schedule dialog box Scheduling deployment using Vpls ManagerCreating a new Vpls instance from a duplicate Reviewing the Vpls Manager summaryEditing a Vpls instance Deleting a Vpls instanceTo edit a Vpls instance, do the following Filtering for Vpls traffic monitoring Select Monitor Mpls VplsVpls Monitor dialog box displays Figure Vcid pools Select Configure Mpls Vcid PoolVcid pools Viewing, creating, and deleting Vcid poolsConfiguring a maintenance association 802.1ag Connectivity Fault Management802.1ag CFM Add Maintenance Association dialog box displays900 53-1003056-01 Edit Maintenance Association dialog box displays Editing a maintenance association802.1ag Connectivity Fault Management Click Close on the Configure 802.1ag CFM dialog box902 53-1003056-01 903 28 802.1ag Connectivity Fault Management Adding a MEP to a maintenance association905 Editing a MEP 907 Viewing the MEPs in a maintenance association Deleting a maintenance association Checking the connectivity status of remote MEPs Sending a loopback message Click Loopback Sending a linktrace messageClick Linktrace Configuring frame delay 915 916 53-1003056-01 Viewing the VIP Servers Select Configure Application Delivery VIP ServersVIP Servers VIP Servers overviewViewing the VIP Servers Viewing VIP Server information Viewing VIP Server informationVIP Servers list Disabling servers or server ports Enabling or disabling servers or server portsServer port statistics Enabling servers or server portsDeleting a row from the Server Port Statistics list Gslb Manager Global Server Load BalancingSelect Configure Application Delivery Gslb Viewing the Gslb ManagerTo view the Gslb Manager, perform the following steps To create a Gslb policy, perform the following steps Gslb policy managementCreating a Gslb policy Gslb policy management926 53-1003056-01 Applying metrics on the Metrics tab Adding a prefix on the Prefix tab Connection Load WeightsImporting IP addresses from a file Deleting a prefix from the Prefix list930 53-1003056-01 Adding a site configuration Gslb site managementGslb site management Adding ServerIron ADX products to the site Managing zones Gslb zone configurationAdding a zone configuration Gslb zone configurationAdd Hosts dialog box Adding a host to a zone Editing the list of IP addresses and weights Deleting a zone configurationList of IP Addresses and Weights dialog box displays Controller configuration Controller configurationController Configuration tab displays Creating a new Gslb controller configuration 939 Deploying a controller configuration Scheduling a deployment One Time Hourly Daily Weekly Monthly Yearly SSL certificates SSL Certificates for ServerIron ProductsCertificate View tab Figure Product View tab Figure SSL certificate configurationAccessing SSL certificates on the Certificate View tab SSL Certificates dialog box has two tabs945 SSL Certificates dialog box Product View tab Accessing SSL certificates on the Product View tabGenerating a certificate signing request 948 53-1003056-01 949 Related topic Adding an SSL certificate and key fileEditing an SSL certificate and key file Viewing SSL certificate details Duplicating an SSL certificate and key fileImporting certificates and keys from file locations Importing certificates and keys from products Exporting certificates and keys Deploying certificates and keys Creating key passwords 958 53-1003056-01 Chaining SSL certificates Appending SSL certificates960 53-1003056-01 Deleting SSL certificates 962 53-1003056-01 Introduction to the Deployment Manager Editing a deployment configurationSelect Configure Task Scheduler Deployment ManagerDuplicating a deployment configuration Generating a deployment report Deleting a deployment configurationDeploying a configuration Viewing deployment logsSearching the configuration snapshots Generating a deployment configuration snapshot report967 968 53-1003056-01 SAN performance overview Performance DataSAN performance overview SAN performance measuresSAN performance management requirements Example of default access control listExample of Snmp Example of setting Snmp 974 53-1003056-01 Snmp GET Snmp SETFCIP-MIB YES Select Monitor Performance Real-Time Graph SAN real-time performance dataGenerating a real-time performance graph SAN real-time performance dataFiltering real-time performance data Real Time Performance Graphs dialog box displaysOpen the Real Time Performance Graphs dialog box Graph display Fcip Snmp Exporting real-time performance dataPerformance statistics counters ProtocolHBA, CNA HttpHBA, CNA HCM API FC, GEType Protocol Source OID value IP performance monitoring and traffic analysis IP configuration requirementsIP real-time performance monitoring Monitoring real-time performanceIP real-time performance monitoring 984 53-1003056-01 Adding products and ports to real-time performance Removing products and ports from real-time performanceClick Sources from the Real Time Graphs/Tables dialog box Click Mibs tab in the Available Measures area Adding measures to productsRemoving measures from products Select measures Real Time Graphs/Tables dialog box displaysAdding measures to ports Adding collectibles to monitoring Removing measures from portsConfiguring the performance graph Configuring the performance graph displayRemoving collectibles from monitoring Show data points graph Minutes Hours Day Configuring graph optionsGraph Options dialog box Historical Graphs/Tables dialog box 993 Spreadsheet .csv Image .png Exporting a graphPrinting a graph Choose Export File Format dialog box displaysIP historical performance monitoring Name Collector Basics Editing system collectorsDisplaying historical data collectors IP historical performance monitoring997 Adding or editing a historical data collector Enabling a historical data collector999 1000 53-1003056-01 1001 1002 53-1003056-01 1003 1004 53-1003056-01 Configuring a MIB walk instance Adding third-party device MIB objects manuallyDuplicating a historical data collector Select Monitor Performance Historical Data Collectors Deleting a historical data collectorAdding, editing, or duplicating a user-defined expression Duplicating system data collectors1007 Complete the following steps to delete an expression Deleting an expressionSelect the Data Monitoring tab Viewing Historical Graphs/TablesNetIron Historical Graph display Select the Collection Status Summary tab Mouse functions for graphs To map a MIB name, use the following format MIB data collectorsMapping a MIB object to a unit name MIB data collectorsComplete the following steps to create a report IP Custom performance reportsCreating a custom report IP Custom performance reports1015 Time Settings Sampling Granularity 1017 Click the Identification tab Exporting an Snmp Monitor report Interpreting the Snmp Monitor reportIP sFlow configuration Configuring sFlowIP sFlow configuration IP sFlow configuration Click Next Interface Payload sFlow Settings dialog box displaysInterface Speed Sampling rate Product Payload SFlow Destination dialog box displays Click Next Select the Report Definitions tab Creating custom sFlow reportsIP sFlow configuration Select the Product & Port tab 1026 53-1003056-01 1027 IP sFlow configuration Select the Layer 3 & 4 tab Add Report Definitions dialog box, User Identification tab Select the User Identification tabAdd Report Definitions dialog box, Time Settings tab Select the Result Settings tab Add Report Definitions dialog box, Result Settings tab 1033 Select Monitor Traffic Analysis Custom Reports Scheduling custom sFlow reports1035 1036 53-1003056-01 Device-level configuration requirements IP Traffic analyzer monitoring and sFlow reportsSuspending a custom sFlow report schedule Select Monitor Traffic Analysis Monitor sFlow 802.1X configuration requirementsDisplaying sFlow monitoring reports IP Traffic analyzer monitoring and sFlow reportsReport list Selecting a reportMeasure list Save and close the ipconfig.properties file Interpreting an sFlow traffic reportThis field shows the date and time the report was requested Viewing top MAC talkers Category list, select L3/L4 Reports Viewing top Vlan talkersViewing all IPv4 Layer 3 or Layer 4 Top Talkers Viewing all Layer 3 and Layer 4 trafficReports list, select IPV4 Next list, select TCP Viewing IPv4 top TCP talkersTCP Viewing IPv4 top UDP talkers Viewing IPv4 top Icmp talkers Category list, select L3 or L4 ReportsIcmp Viewing IPv6 Top Talkers Viewing IPv4 OthersViewing other Layer 3 or Layer 4 Top Talkers Complete the following steps to change these combinations Enabling and viewing TCP reportsDefining invalid TCP packet combinations RST-SYN RST-FIN RST-PSH RST-URG FIN-SYNDisplaying the invalid TCP Flags report Valid TCP flags reportType list, select Invalid TCP Flags Viewing VCS fabric Top Talker reports Viewing BGP paths reportSelect Monitor Traffic Analysis Traffic Accounting Troubleshooting sFlow reportsIP traffic accounting IP traffic accounting1055 1056 53-1003056-01 Frame Monitor Frame MonitorFrame types ScsiScsi RW Frame Monitoring requirements Creating a custom frame monitorFrame Monitor Configuration Status dialog box Assigning a frame monitor to a port Editing a frame monitorRemoving a frame monitor from a port Finding frame monitor assignmentsRemoving a frame monitor from a switch 1064 53-1003056-01 Power center overview Power CenterSelect Monitor Power Center Data monitoringViewing PoE data for products To view PoE data for a port, complete the following steps Viewing PoE data for portsTo filter port details, complete the following steps Filtering port detailsViewing attached device properties 1070 53-1003056-01 To view a PoE chart, complete the following steps Viewing PoE charts1072 53-1003056-01 1073 Refreshing PoE data PoE power on demand PoE power on demandConfiguring automatic data refresh Powering up PoE-capable ports on demandPowering down PoE-capable ports on demand Scheduling an power up deployment Schedule PoE power deploymentSchedule PoE power deployment 1079 1080 53-1003056-01 Configuring a yearly deployment schedule Scheduling a power down deployment Updating a power deployment schedule Scheduled Ports ScheduleName dialog box displays Click Show PortsDeleting a power deployment schedule PoE thresholds Adding a PoE product thresholdPoE thresholds PoE Consumption Consumption % PoE AllocationAdding a PoE port threshold Port allocation Port consumption Port consumption % Thresholds dialog box Choose one of the following measuresTo view PoE thresholds, complete the following steps Viewing PoE thresholdsUpdating a PoE threshold To update a PoE threshold, complete the following stepsDisabling PoE thresholds To enable PoE thresholds, complete the following stepsTo disable PoE thresholds, complete the following steps Enabling PoE thresholdsViewing PoE performance Monitoring real time power performance on productsViewing PoE performance Deleting PoE thresholds1094 53-1003056-01 1095 Monitoring real time power performance on ports 1097 1098 53-1003056-01 Policy monitor overview Policy MonitorPolicy monitor overview Fabric policy monitorsSwitch and router policy monitors 1102 53-1003056-01 Host policy monitors 1104 53-1003056-01 Frequency Weekly Preconfigured policy monitorsNext Run Next time the policy will run using the format Management policy monitorViewing policy monitor status Viewing existing policy monitors Select Monitor Policy Monitor Adding a policy monitor1109 Add Policy Monitor dialog box, Switch/Router Checks tab 1111 Add Policy Monitor dialog box, Hosts Checks tab Policy monitor scheduling Configuring a one-time policy monitor scheduleConfiguring a monthly policy monitor schedule Configuring an hourly policy monitor scheduleConfiguring a daily policy monitor schedule Configuring a weekly policy monitor scheduleDeleting a policy monitor Editing a policy monitorConfiguration rules Viewing a predefined configuration rulePredefined configuration rules Viewing configuration rule details Configuration rules Port Profile Interface Rule expressionsAdd Configuration Rule dialog box displays Figure 1118 53-1003056-01 1119 Click Cancel on the Add Configuration Rule dialog box Adding a configuration ruleClick OK on the Add Configuration Rule dialog box Duplicating a configuration ruleEditing a configuration rule Click the Switch/Router Checks tabClick Add Configuration Rule Click OK on the Edit Configuration Rule dialog box Exporting a configuration ruleImporting a configuration rule Deleting a configuration ruleViewing predefined configuration conditions Adding a configuration conditionAdd Configuration Rule dialog box displays Add Condition dialog box displays Figure Select Add ConditionSelecting a product Duplicating a configuration conditionYou cannot edit a predefined configuration condition Editing a user-defined configuration conditionPredefined conditions Configuration rules Predefined conditions Policy Monitor dialog box displays Click Add Viewing a predefined configuration blockAdd Block dialog box displays Figure Adding a configuration blockConfiguration rules Add Monitor dialog box displays Select Add BlockSelect the Switch/Router Checks tab Duplicating a configuration blockYou cannot edit a predefined configuration block Editing a user-defined configuration blockDeleting conditions and blocks Predefined blocksClick Delete Click Yes on the confirmation message Running a policy monitor Viewing a policy monitor report Viewing a policy monitor report1137 Click Export File Download dialog box displays Click Save Exporting a policy monitor reportClick History Viewing historical reports for all policy monitorsViewing historical reports for a policy monitor Policy Monitor dialog box displaysViewing historical reports for a policy monitor Fault management overview Fault ManagementEvent Purging Event notificationRestrictions Supported IP address types1143 Setting up basic event filtering Defining filtersDefining filters Click Advanced Setting up advanced event filtering1146 53-1003056-01 Snmp traps Snmp Trap Recipients dialog box, shown in , displays Adding a trap recipient to one or more switchesSelect Monitor Snmp Setup Product Trap Recipients Snmp trapsSnmp Trap Forwarding dialog box, shown in , displays Removing a trap recipient from one or more switchesSelect Monitor Snmp Setup Trap Forwarding Snmp trap forwardingAdding a trap destination Select the Enable trap forwarding check boxAdding a new trap filter 1152 53-1003056-01 Event reception Accept Snmp v1/v2c traps with only these community strings Event Reception dialog box, shown in , displaysDo not accept Snmp v1/v2c traps Accept Snmp v1/v2c traps with any community stringSnmp traps Snmp security and authentication Privacy protocol Authentication Result Credential typeAdding an Snmp v3 credential Importing a new MIB into the Management application Adding an Snmp v1 or v2c community stringTrap customization Registering traps Unregistering a registered trap Customizing a registered trap definitionClick the Registered button Select a product group from the Fabric / Products list Reverting the customization of a registered trap to defaultSnmp informs Enabling or disabling Snmp informsAdding a syslog recipient SyslogsRemoving a syslog recipient SyslogsTo remove a syslog recipient, complete the following steps Syslog Forwarding dialog box, shown in , displays Select Monitor Syslog Configuration Syslog ForwardingSelect the Enable syslog forwarding check box Adding a syslog forwarding destinationAdding a syslog filter 1165 Select Monitor Event Processing Event Actions Event action definitionsSnort message forwarding Creating an event action definitionEvent action definitions Selecting an event for an event action1168 53-1003056-01 Configuring varbind filters Sources pane of the Add Event Action dialog box Selecting source address products and portsClick Next to advance to the Sources pane Configuring event action policies Editing event actions 1174 53-1003056-01 1175 Acknowledging special events Special events handling1177 Configuring event action e-mail settings Modifying an event action definition Click Cancel to cancel the operationDeleting an event action definition Configuring event actions for Snort messagesPseudo events Click the Import Snort Rule buttonImport Snort Rule File dialog box displays, shown in Figure Pseudo Events dialog box, shown in , displays Displaying pseudo event definitionsCreating pseudo event definitions Select Monitor Event Processing Pseudo EventsSetting pseudo event policies Filtering pseudo event traps 1185 Deleting a pseudo event definition Editing a pseudo event definitionAdding a pseudo event on the escalation policy 1188 53-1003056-01 Adding a pseudo event on the resolving policy 1190 53-1003056-01 Adding a pseudo event on the flapping policy 1192 53-1003056-01 Event custom reports Defining report settings Event custom reportsSelect Reports Event Custom Reports Defining the report identity 1196 53-1003056-01 To filter a report definition, complete the following steps Filtering a report definitionAdd/Edit Report Definition dialog box Filter tab Add/Edit Report Definition dialog box Product tab displays Filtering report events by date and time1200 53-1003056-01 Editing a report definition Event custom report schedules Deleting a report definitionEvent custom report schedules Adding or editing an event report schedule One Time Event logs Event logsViewing event logs Copying part of a log entryExporting the entire log Copying an entire log entryMailing all event details from the Master Log Mailing selected event details from the Master LogDisplaying event properties from the Master Log Event logs Event Properties Click Close to close the Event Properties dialog boxEvent Field Description Select Table Copy Table Copying part of the Master LogCopying the entire Master Log Exporting the Master LogFiltering events in the Master Log ‘unnamed’ filter Deleting a Filter ‘none’ filterEditing a Filter Duplicating a FilterPacket Capture Pcap Configuring packet capturesSelect Configure Packet Capture Pcap Configure Pcap dialog box, shown in , displays1214 53-1003056-01 Technical Support Server and client support saveCapturing Server and Client support save data Capturing Server support save data Capturing Client support save data Server and client support save Client support save using a command line interfaceClick the Schedule tab Device technical supportScheduling technical support information collection Device technical supportSelect the Enable scheduled Technical Support Data check box 1221 Click OK on the Technical SupportSave dialog box Starting immediate technical support information collectionClick the Generate Now tab, if necessary Progress Click Close on the Technical SupportSave Status dialog boxField Description Firmware TypeViewing the technical support repository Type Default location Default naming conventionMail button Saving technical support information to another locationClick OK on the Technical Support Repository dialog box Available SupportSaveMailing technical support information Select the file you want to delete in the table Click Delete Deleting technical support files from the repository1229 1230 53-1003056-01 Browser requirements ReportsReports overview Viewing IP reportsSelect E-mail as Html Select E-mail as CSV Exporting and saving IP reports to a fileExporting IP reports to e-mail recipients Select Export as Html Select Export as CSVIP Wired Products report IP report contentsIP Wired Products report Detailed Product Report Export buttonStacking Units IP Addresses Stacking PortRealtime ModulesController Cluster Cluster Peer MCTPhysical Ports GRE TunnelsAP List Count Detailed Cluster ReportSystem Information System Name valuesNodes IP Module report FC PortsPhysical Media IP Port VLANs report IP Layer 3 Vlan reportField/ComponentDescription IP Subnet report Layer 3 Vlan report fields and components IP Subnet reportPort Name IP Address reportMAC Address report IP Address reportIP Physical Ports Realtime report IP Stacking Ports Realtime reportIP Physical Ports Realtime report IP Physical Media Realtime report IP Physical Media Realtime reportSelect Reports Deployment IP Deployment reportsViewing a deployment report IP Deployment reportsReports Template Manager overview Preconfigured reportsReports Template Manager overview User-defined reportsAccessing the Report Template Manager Select Reports Report ManagerReport Template Manager dialog box displays Figure Viewing a report Importing a report template Exporting a report templateDeleting reports Report content and functions Product Count Products List reportIP address of the product Displayed for products that support stacking Physical port information for each port on the product Product Report ClusterPorts Tx/Rx Ratio report Total Received MB Summary table LocationDevice Name Detailed Product ReportLow Traffic Ports report Max Tx Utilization %Max Rx Utilization % Exporting data from the report Dashboard main menus Menu Command Command OptionsApplication menus This appendixEdit Menu Command Command OptionsIP main menus IP main menusDiscover Menu Element Manager. Select to configure a selected device Configure MenuLsan Zoning Device Sharing. Trial and Licensed version Monitor Menu Reports Menu IP shortcut menus IP shortcut menusTools Menu Launches the Real-Time Graphs / Tables dialog box Component Menu/Submenu Commands CommentsIP shortcut menus IP Subnet IronWare deviceL2 ACL DCBVCS/VDX Third-party device 1273 1274 53-1003056-01 Event reason code FRU code/Event type Description Severity Call Home Event TablesIP Call Home Event Network OS Call Home EventCall Home Event Tables Network OS Call Home Event Product status events Event CategoriesProduct audit events Security events Security eventsSecurity events for FC devices Security events for IP devicesManagement server events User action eventsTrap name Product eventsIP Performance monitoring events Product eventsIP Performance monitoring events About user privileges User PrivilegesPrivilege Description No Privilege Read-Only Read/Write About user privileges Application privileges and behaviorEvent Notification Setup button in the Users dialog box Setup Mail server used to Send e-mail Disables EventSyslog Registration Options commandRegistration Forwarding dialog box Monitor menu Event Storage optionPerformance Graphs dialog box and enables all controls Management commandEnables the Security L2 Update and OKPolicy monitors Command on the Monitor Menu Disables Policy Monitor Enables Policy MonitorConfigure Switch Replicate menu Logs menuServer Options menu Monitor Technical SupportSave, Upload Repository command Upload Failure DataView Repository Technical Support menu Repository commands Capture, and View1291 Compare and Export Cancel and Help buttonsZoning Compare/Merge dialogCompare/Merge dialog Zone Config tab Switch, ActivateEdit Limits command Lsan Zoning DeviceZoning Scope list does IP CLI About user privileges IP privileges and behaviorFilter IP L3 ACLProfile tab IP Mpls VLLIP Mpls Vpls IP MPLS- LSPAbout Roles and Access Levels About Roles and Access Levels IP privileges and behaviorApplication Features and Role Access Levels 1299 IP Mpls LSP Device Properties Viewing SAN device propertiesViewing Fabric properties Viewing SAN device properties Viewing SAN device properties Fabric propertiesClick OK on the FabricName Properties dialog box to close Viewing SAN device properties Device properties Remote Switch WWN Preshared key configuredRemote Switch Name Remote Switch IPViewing Storage properties ICLSelect Edit Properties Viewing SAN device properties Viewing iSCSI Properties dialog box ISNS Service Command Descriptor Block CountDigest Error Count ISCSI ServiceViewing port properties Active FC4 Types Class of ServiceAdditional Port Info AddressViewing SAN device properties Port properties Locked Port Type Long Distance SettingISCSI button ISCSI CapablePort State Symbolic NameTroubleshooting list Port Speed Gb/sUser Port # IP device propertiesViewing IP device and port properties IP device properties Port propertiesAlias VCS ModeConfig Mode Detailed Report buttonIP device properties Show list Profile ModeAccess Points tab Port Profiles tabDevice MAC Connected switch \ PortTransceiver Temperature Chassis-Power Supply section of Detailed ReportViewing VCS fabric properties Fabric Status Licensed FeaturesAccess Gateway Mode Nodes tabAssociated MACs list MAC CountVLANs Domain CountNative VLAN/VLAN IP device properties 1324 53-1003056-01 FC Ports properties Identifier The identifier of the port Host properties Host propertiesSFP/Port Optics Field Description Viewing adapter port propertiesHost properties Adapter port properties Click OK to close Properties customizationAdding a property field Properties customization Adapter port propertiesDeleting a property field Editing a property fieldEditing a property field directly Properties customization Regular Expressions CharactersConstruct Matches Posix character classes US-ASCII only Regular Expressions CharactersCharacter classes Predefined character classesBoundary matches Regular Expressions Posix character classes US-ASCII onlyJava.lang.Character classes simple java character type Classes for Unicode blocks and categoriesLogical operators Regular Expressions Greedy quantifiersReluctant quantifiers Possessive quantifiersSpecial constructs non-capturing Regular Expressions Back referencesRegular Expressions CLI Templates CLI Templates HyperEdge Stack Port Deletion HyperEdge Stack EnableHyperEdge Stack Disable HyperEdge Stack Port CreationHyperEdge Peri Port Creation IronWare OS Enable Web Element ManagerIronWare OS Configure L3-Access-List CLI Templates HyperEdge Stack Trunk DeletionMCT Cluster Undeployment CLI Templates IronWare OS Configure L2-Access-ListMCT Cluster Creation MCT Cluster DeploymentMCT Client Creation Mpls Loopback Interface ConfigurationMpls Core Interface Configuration CLI Templates MCT Cluster DeletionAmpp CLI Templates Mpls Endpoint ConfigurationNetwork OS Configure CRC Align Errors Monitor Network OS Associate MAC to Port ProfileCLI Templates Network OS Configure Extended L2 Access List Network OS Configure Inter Frame Gap Violation FencingNetwork OS Configure Inter Frame Gap Violation Monitor Network OS Configure RX Symbol Errors Monitor Network OS Configure Standard L2 Access ListNetwork OS Create CoS Mutation Map Network OS Create Vlan Classifier Group CLI Templates Network OS Create Lldp ProfileNetwork OS Create Port Profile Network OS Create Traffic Class MapCLI Templates Network OS Create Vlan Classifier Rule Network OS Update ACL on Port ProfileNetwork OS Update QoS on Port Profile Network OS Update Vlan on Port ProfilePrivate Vlan Add native Vlan mode to Pvlan trunk CLI Templates Private Vlan Configure Vlan as a PvlanPrivate Vlan Delete Pvlan configuration from Vlan Private Vlan Configure Pvaln mode in L2 interface$PRIMARYVLANIDINTEGER $SECONDARYVLANIDINTEGER Private Vlan Delete Pvlan mapping from promiscuous portPrivate Vlan Delete Pvlan associations from host port Private Vlan Delete Pvaln associations from trunk portVRF Delete Route Targets Export and/or Import Configuration VRF Route Distinguisher ConfigurationVRF Maximum routes configuration for IPV4 Address Family VRF Route Targets Export and/or Import ConfigurationIronWare OS Vlan Remove interfaces from Vlan as untagged IronWare OS Vlan Configure virtual routing interfaceIronWare OS Vlan Enable Spanning Tree Protocol on IOS Vlan CLI Templates VRF Display VRF InformationNetwork OS Vlan Vlan Interface Deletion Network OS Vlan Layer2 Switch Port ConfigurationNetwork OS Vlan Native Vlan Configuration Network OS Vlan Vlan Interface CreationNetwork OS Vlan Access Interface Configuration Network OS Vlan Disable Access Interface ConfigurationNetwork OS Vlan Enable Spanning Tree Protocol on NOS Vlan 1356 53-1003056-01 Troubleshooting Browser troubleshooting Application Configuration Wizard troubleshootingClient browser troubleshooting Client browser troubleshootingConfiguration backup and restore troubleshooting Element Manager troubleshootingFirmware download troubleshooting Firmware download troubleshootingSw0FID128admin sshutil delknownhost Launch Client troubleshooting Launch Client troubleshootingSelect Start Settings Control Panel Java Master Log and Switch Console troubleshooting Master Log and Switch Console troubleshootingUnix operating systems Select Discover IP Products Patch troubleshootingPatch troubleshooting Click the Global Settings tabProfessional edition login troubleshooting Server troubleshootingProfessional edition login troubleshooting Server Management Console troubleshooting Server Management Console troubleshootingManagement console errors Supportsave troubleshooting Supportsave troubleshootingSelect Properties Problem Master log warning message Technical support data collection troubleshootingWireless troubleshooting Technical support data collection troubleshootingZoning troubleshooting Wireless troubleshooting Zoning troubleshootingZoning troubleshooting Achcallcenter AchcallcenterconfigDatabase Fields Database tables and fieldsAchinfo Database tables and fields AcheventAcheventfiltermap AchfilterAordevicegroupmap AdapterportconfigdetailsAdapterportconfigproperty AdapterdriverfiledetailsAorinmportgroupmap AordevicemapAorfabricmap AorhostmapAvailableflyoverproperty BirtreportparameterBirtreportruntemplate Database tables and fields Birtreportruntemplate BirtreportscheduleconfigBootimagedrivermap BootimagefiledetailsCapability Database tables and fields BootimagefiledetailsBootlunsequence BootlunsequencedetailDatabase tables and fields Card Ceduserpreference CardcapabilityCedapplication CedapplicationmemberCeeport CfgbackuparchiveDatabase tables and fields Cfgbackuparchive ChangelogClitemplate Clientview Database tables and fields ClitemplateCluster ClientviewcolumnClientviewmember ClientviewmemberhostCnaethportconfig CnaethportCnaproductconnectivity Database tables and fields Cnaethportconfig CnaportCollector Collectortargetentry ConfigblockCollectormibobjectentry CollectorsnmpexpressionentryCoreswitch ConfigconditionDatabase tables and fields Coreswitch Coreswitchdetails CoreswitchcapabilityCoreswitchchecksum CoreswitchcollectionDatabase tables and fields Coreswitchdetails Cryptohost Cryptolun Database tables and fields Cryptolun Cryptoswitch Cryptotargetcontainer Database tables and fields CryptoswitchDatabase tables and fields Cryptotargetcontainer CustomfavoritesobjectlistDashboard Dashboardprovider Database tables and fields DashboardDashboardcanvas DashboardcanvaspreferenceDashboardwidget Defaultfavorites Database tables and fields DashboardwidgetDashboardwidgetpreference Database tables and fields Defaultfavorites DefaultwidgetpreferenceDeploymentconfiguration Database tables and fields Deploymentconfiguration DeploymenthandlerDeploymentproductstatus Database tables and fields Deploymentproductstatus DeploymentreporttemplateDeploymentstatus Device DeploymenttargetmapDatabase tables and fields Device Tacpluspasswordreadonl TacpasswordportcfgTacpasswordreadonly TacpluspasswordportcfgMplsmanagestate LicensedfeaturesTrapregistered Portcount=SSH =HTTPS =WINGHTTPS Poecapable IsdcbswitchProductfamily NetconftransportVcslicensed IsprincipalswitchWirelesstype VcsidDeviceenclosure DeviceconnectionDatabase tables and fields Deviceenclosure Devicefdmidetails DeviceenclosurememberDatabase tables and fields Devicefdmidetails DevicegroupDevicegroupentry Database tables and fields Devicegroup DevicemacgroupmappingDevicenode Deviceport Database tables and fields DevicenodeDeviceportmacaddressmap DeviceportgigeportlinkEncryptionengine DiskusageEncryptiongroup Database tables and fields EncryptionengineDatabase tables and fields Encryptiongroup Encryptionkmipparameters EncryptiongroupmemberEncryptiontapepool EthernetcloudEthernetisl Database tables and fields Ethernetisl EventEventdescription Database tables and fields EventEventcallhome EventcategoryEventfwdfilter EventdetailsDatabase tables and fields Eventfwdfilter EventinstanceEventmodule Eventnotification EventoriginEventpolicy Eventpolicysourceentry Database tables and fields EventpolicyEventrule Database tables and fields EventpolicysourceentryEventprocessormap Fabric Database tables and fields EventruleEventruleaction Database tables and fields Fabric Fabriccollection FabricchecksumFabricmember Database tables and fields FabriccollectionFabricdiscoverypolicy FabricdiscoverypolicyruleFabricvcsclustermap FabricthresholdsettingFavorites Database tables and fields FabricmemberDatabase tables and fields Favorites FcipcircuitportmapFcipporttunnelmap Fciptunnel Database tables and fields Fciptunnel Fciptunnelcircuit Database tables and fields Fciptunnelcircuit Circuitstatusstring MismatchedconfigurationsSecurityflag CircuitstatusFciptunnelperformance Fcoedevice FeatureFeatureeditionmap FeaturesusageDatabase tables and fields Featuresusage FicondeviceportFirmwarefiledetail Firmwareswitchdetail FoundrydeviceFoundrymodule Fporttrunkgroup Database tables and fields FoundrymoduleFoundryphysicaldevice FoundryphysicalportFRU Ftpserver Database tables and fields FRUGeneratedreport Database tables and fields Generatedreport GigeportGretunnelinterface GigeportethernetcloudlinkGigeportstats GlobalvlanHBA HaclusterDatabase tables and fields HBA Hbanodemap HbaportSupportedcos SwitchipOperatingtopology SUPPORTEDFC4TYPESHbaportdetail Database tables and fields Hbaportdetail Hbaportfcoedetails HbaportdeviceportmapDatabase tables and fields Hbaportfcoedetails Hbaremoteport Hbaremoteportlun Database tables and fields HbaremoteportHostdiscoveryoption HbatargetHealthstatus HealthtargetstatusDatabase tables and fields Hostdiscoveryoption HostdiscoveryreqgroupHostdiscoveryrequest Hypervvirtualmachine Database tables and fields HostdiscoveryrequestHypervvmhbaportmap IFLInterface Interfacedeploymentconfig Database tables and fields InterfaceIpdevicelicense Database tables and fields Ipdevicelicense IpinterfaceIpportgroup ISL IprouteIpsubnetvlan IpxnetworkvlanIslconnection SourceswitchportidTargetswitchportid Database tables and fields ISLTargetmasterport IsltrunkgroupMasterconnectionid SourcemasterportL2ACCESSCONTROLENTRY IsltrunkmemberKeyvault L2ACLINTERFACEDEPLOYMAP Database tables and fields L2ACCESSCONTROLENTRYL2ACCESSCONTROLLIST L2ACLDEVICEDEPLOYMAPL3ACLINTDEPLOYMENTMAP Database tables and fields L2ACLINTERFACEDEPLOYMAPL2NEIGHBOR L3ACLDEVICEDEPLOYMENTMAPLAG Database tables and fields L3ACLINTDEPLOYMENTMAPLagmember Lastconfigupdatetime Database tables and fields LagmemberLaunchincontextmodule License Database tables and fields LaunchincontextmoduleLicensedowngradedetails Licenserule LicensefeaturemapLicensedfeature Database tables and fields LicensedowngradedetailsLsanproxydevice LsantagconfigLock LsandeviceMctclient LsanzonedbconfigLsanzone LsanzonememberMacgroup Database tables and fields MacfilterMacfilterdevdeploymentmap MacfilterintdeploymentmapManagedelement MacgroupMapsevent MacgroupmemberDatabase tables and fields Mapsevent MapseventdetailsMapseventcauseaction Mapspolicy MarchingantsMeasure Module MessagerecipientMigrationhistory Database tables and fields Module Moduleslotpresent MplsadmingroupMplsadmingroupinterfacerelation MplslspMplspath MplspathhopMplsrsvplsp Mplsrsvplspactuallyroutedhop MplsrsvplspadmingroupMplsrsvplspadmingroupcontainer Database tables and fields MplsrsvplspMplsrsvplspparameters MplsrsvplspfrrparametersMplsrsvplsptunnelresource MplsserviceDatabase tables and fields Mplsrsvplspparameters MplsrsvplsppathDatabase tables and fields Mplsservice MplsservicedevicerelationMplsserviceendpointrelation Mrpringdevice Database tables and fields MplsserviceendpointrelationMplsservicepeerrelation MrpringDatabase tables and fields Mrpringdevice Nicprofile N2FPORTMAPNetworkvlan NetworkscopetypeNpflowdefinition Database tables and fields NportwwnmapDatabase tables and fields Npflowdefinition NpsubflowOuiguesseddevicemap Perfcollector PasswordhistoryPbrinterfaceconfig OuivendorPbrruleacllist PbrpolicyPbrrule PbrnexthopDatabase tables and fields Pbrruleacllist PhantomportPhysicaldevice Physicalinterface Database tables and fields PhysicaldevicePhysicalport PmcollectormeasuresettingPmcollectortargetsetting Database tables and fields PhysicalinterfaceDatabase tables and fields Pmcollectortargetsetting PmcollectortimeseriesmappingPmdashboardwidget Pmdatacollector Database tables and fields PmdashboardwidgetPmmeasure Database tables and fields PmdatacollectorPmstatsagingpolicy Pmwidgettargetentry PmwidgetmeasuretypePmwidgetmeasuretypeentry PmwidgetmonitortypePoethreshold Database tables and fields PmwidgettimeseriesentryPmwidgettopncollectorentry PmwidgetuserentryPolicyrulemap Database tables and fields PoethresholdPoethresholdevent PolicyrulePortbottleneckconfig PortbottleneckstatusPortcommissioncimomserver Database tables and fields Portcommissioncimomserver PortfencingpolicyPortfencingpolicymap Database tables and fields Portfencingpolicymap PortprofilePortprofiledomain Portprofileqosmap PortprofiledomainmapPortprofileinterfacemap PortprofilemacmapPortprofilevlanmap PortprofileqospfcmapPortvlan Privilege Database tables and fields PortvlanProductapp Qrtzcrontriggers ProtocolvlanQrtzblobtriggers QrtzcalendarsQrtzpausedtriggergrps QrtzlocksQrtzjobdetails QrtzjoblistenersQrtztriggers Database tables and fields QrtzschedulerstateQrtzsimpletriggers QrtzjtriggerlistenersQuorumcardgroupmapping RecoverycardgroupmappingRaslog QuerybaseddevicegroupResourcefabricmap ReporttypeReporttemplate ReportdrilldowntemplateRuleblockmap RoleResourcehostmap RoleprivilegemapSAN RulelogicalexpressionmapSanconnection Scomhost Database tables and fields SanconnectionSecuritypolicy Currentreading SensorSelectedflyoverproperty SensoridSflowhoursummary SflowcheckpointL3SRCADDR InpriorityOutpriority SrcmacSflowminutebgp SflowiprouteinfoSflowminutemac Database tables and fields SflowminutebgpSflowminutebgpslnum SFLOWMINUTEL3SLNUMSflowminutevlan Database tables and fields SflowminutemacSflowminutemacslnum SflowminutesummarySFLOWREPORTL4SOURCE Database tables and fields SflowminutevlanSflowminutevlanslnum SFLOWREPORTL3SOURCEDatabase tables and fields Sflowstaging Sflowstagingslnum SmartcardSnmpcredentials Database tables and fields SmartcardSmiasanname SnapshotproductstatusDatabase tables and fields Snmpcredentials SnmpdataMibindex Database tables and fields SnmpdataSNMPDATA1DAY SNMPDATA2HOURSNMPDATA30MIN SnmpexprdataSNMPEXPRDATA1DAY Snmpprofile Database tables and fields SNMPEXPRDATA1DAYSNMPEXPRDATA30MIN SnmpexpressionDatabase tables and fields Snmpprofile ReadcommunitystringWritecommunitystring Sslcertificate SnmptrapcredentialSNMPV3FORWARDINGCREDENTIAL SourceobjecttypeSslkey Database tables and fields SslcertificateSslcertificatevipservermap Stpport SslkeypasswordDatabase tables and fields Sslkey StatsagingStpport StpinstanceSwitchbottleneckconfig Database tables and fields StpinstanceField SwitchconfigSwitchconfigdetail SwitchlicenseSwitchport SwitchmodelDatabase tables and fields Switchport Qosenabled NpivenabledFcfastwriteenabled IslrrdyenabledLogicalportwwn DefaultareaidEportdisabled LogicalportnumberSwitchportperformance Database tables and fields Switchportperformance Targettype SwitchthresholdsettingSystemcardenginemapping SystempropertyTIMESERIESDATA1DAY ThresholdmeasureThresholdpolicy TimeseriesdataDatabase tables and fields TIMESERIESDATA1DAY TIMESERIESDATA2HOURTABLE\399 TIMESERIESDATA30MIN TIMESERIESDATA1 TIMESERIESDATA11DAYSumvalue Minvalue Database tables and fields TIMESERIESDATA11DAYTIMESERIESDATA12HOUR TIMESERIESDATA130MINTIMESERIESDATA2 Database tables and fields TIMESERIESDATA130MINTIMESERIESDATA22HOUR TIMESERIESDATA21DAYDatabase tables and fields TIMESERIESDATA22HOUR TIMESERIESDATA230MINTIMESERIESDATA3 Database tables and fields TIMESERIESDATA3 TIMESERIESDATA31DAYTIMESERIESDATA32HOUR TIMESERIESDATA330MIN Database tables and fields TIMESERIESDATA32HOURTIMESERIESDATA41DAY TIMESERIESDATA4TIMESERIESDATA430MIN TIMESERIESDATA42HOURDatabase tables and fields TIMESERIESDATA430MIN ToolappToolpath TrillTrilltrunkgroup TrilltrunkmemberTrunkgroupinterface Trunkgroupmember UserUserdefinednetworkscope Database tables and fields UserUseraormap UserdefineddevicedetailUserrealtimemeasuremapping UserrealtimemeasuresettingContent UserpreferenceVportdetail UserresourcemapUserrolemap UserstatemapVcnpeer VcnmemberVcnpeer VcsclustermemberVcemprofile Virtualcircuitinterface Database tables and fields VcemprofileVipserver VipserverbindingVirtualfcoeport VirtualfcoeportmacmemberVirtualfcoeportstat Virtualportwwndetails Database tables and fields VirtualfcoeportstatDatabase tables and fields Virtualportwwndetails VirtualswitchDatabase tables and fields Virtualswitch Domainidoffset FcoeloginenabledInsistentdidmode DOMAINMODE239Monitored HifenabledMapsenabledactions CLUSTER1 VcsidVlan Vlanintmacgrouprelation VlaninterfacememberVlaninterfacerelation VlanintctagrelationVmotionevent VllendpointrelationVmdatastoredetails Database tables and fields VmotioneventVmotionpnicdetails VmdatacenterVmdvport Vmdvportgroup Database tables and fields VmdvportDatabase tables and fields Vmdvportgroup VmdvswitchDatabase tables and fields Vmdvswitch VmdvswitchhostmemberVmfchba Vmhost Database tables and fields VmfchbaVmfchbadeviceportmap Vmhostproxyswitch Database tables and fields VmhostVmhostenddevconnectivity Database tables and fields Vmhostproxyswitch VmhostproxyswitchpnicspecVmhostvirtualnic Vmnetworksettings Database tables and fields VmhostvirtualnicVmnicteamingpolicy Database tables and fields Vmnicteamingpolicy VmpathVmphysicalnic Vmsecuritypolicy Database tables and fields VmphysicalnicVmstandardvirtualswitch VmstandardvswitchportVmstdvswitchportgroup Vmstorage Database tables and fields VmstdvswitchportgroupVmvcenter VmstoragehbaremoteportmapVmtrafficshapingpolicy Database tables and fields Vmvcenter VmvcentermemberVmvirtualethernetadapter Database tables and fields Vmvirtualethernetadapter Vmvirtualmachine Vplsendpointrelation Database tables and fields VmvirtualmachineVmvirtualmachinedatastoremap VplsdevicerelationVrconndomain VrconndomaingroupVrconnfcconnection Vrconnmoduleport VrconnmoduleWirelessproductdetails VrconnserverprofileVrconnwwn Wirelessproductrelation WtarchiveZone Zonedb ZonealiasZonealiasinzone ZonealiasmemberZONEIN-ZONESET ZonedbconfigZonedbcontent ZonedbusersViews AdapterportconfiginfoViews AgconnectioninfoBootimagefiledetailsinfo CnaethportconfiginfoCnaportdetailsinfo CNAETHPORT.MTU CNAPORT.ALARMWARNING CnaportinfoCNAETHPORT.HARDWAREPATH, CNAETHPORT.STATUS CORESWITCH.ID CoreswitchdetailsinfoCryptolun LUN, Cryptohost CORESWITCHDETAILS.DESCRIPTIONCoreswitch Left Outer Join Coreswitchdetails CryptohostluninfoDASHBOARD.CREATEDBY CRYPTOTARGETCONTAINER, ENCRYPTIONENGINE, CryptoswitchCryptotargetengineinfo DashboardpreferencesinfoDeploymentconfiguration DeploymentinfoDeploymentlog Deviceconnectioninfo EEMONITORSTATS1DAYINFO EEMONITORSTATS5MININFOEEMONITORSTATS30MININFO EEMONITORSTATS2HOURINFOTEPORTSTATS30MININFO TEPORTSTATS5MININFOTEPORTSTATS1DAYINFO TEPORTSTATS2HOURINFOSwitchinfo CORESWITCH.IPADDRESSCORESWITCH.MAXVIRTUALSWITCHES CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, Fabric VIRTUALSWITCH.CORESWITCHID = CORESWITCH.IDDeviceinfo DEVICENODE.SIMULATED DEVICEPORT.NUMBER DEVICEPORT.PORTIDDEVICEPORT.IPPORT DEVICEPORT.HARDWAREADDRESS Devicenodeinfo DEVICENODE.FABRICID = SWITCHINFO.FABRICIDN2FPORTMAP Switchport Agnport Switchport Agfport N2FPORTMAPINFODevicenode DeviceportinfoDEVICEPORTGIGEPORTLINK.DIRECTATTACH DevportgigeportlinkinfoDEVICENODE.FDMIHOSTNAME DeviceportDevportmacaddrmapinfo IslconnectioninfoIslinfo ISL.DESTPORTNUMBER FABRIC.ID = ISL.FABRICID DESTSWITCHPORT.VIRTUALSWITCHID = DESTVIRTUALSWITCH.IDEthernetislinfo EventdetailsinfoEventinfo Fabricinfo Fciptunnelcircuitinfo FABRICMEMBER.FABRICID = FABRIC.IDFCIPTUNNELCIRCUIT.DSCPDATA Fciptunnelinfo FciptunnelcircuitFCIPTUNNEL.DSCPCONTROL Fruinfo FcoedeviceinfoGigeportecloudlinkinfo Hbaportdetailsinfo Gigeport Switchport CoreswitchHBAPORT.DEVICEPORTID HBAPORT.CONFIGUREDSTATE GigeportinfoHBAPORT.SUPPORTEDFC4TYPES HBAPORT.SUPPORTEDCOS HBAPORTDETAIL.PREBOOTDISABLEDHBATARGET.TRUSTED HbatargetinfoHbaport HBATARGET.DEVICEPORTIDHBAREMOTEPORT.IOLATENCYAVERAGE HealthstatusinfoHBAREMOTEPORT.VENDOR HBAREMOTEPORT.PRODUCTID HBAREMOTEPORT.CURRENTSPEEDDEVICEENCLOSURE.TYPE HostdiscoveryrequestinfoHOSTDISCOVERYREQUEST.ID HOSTDISCOVERYOPTION.VMPORTIflinfo HostdiscoveryrequestHOSTDISCOVERYREQUEST.DEVICEENCLOSUREID = DEVICEENCLOSURE.ID Isltrillinfo ISL Device Vcsdevice IsltrunkgroupmemberinfoISL.DESTDOMAINID ISL.DESTPORTNUMBER DESTDEVICE.MANAGEDELEMENTID AS DestmeidIsltrunkinfo L2NEIGHBOR ISLINFO.SOURCESWITCHID = ISLTRUNKGROUP.VIRTUALSWITCHIDL2NEIGHBORINFO MapseventdetailsinfoTEMPMODULE.MODULEID TEMPMODULE.NUMPORTS ModuleinfoFOUNDRYMODULE.MODULEID FOUNDRYMODULE.SERIALNUM NportwwnmapinfoMODULE.MODULEID MODULE.NUMPORTS MODULE.ISPRESENT PHYSICALDEVICE.DEVICEIDProductinfo PhantomportinfoLastseentimestamp TEMPDEVICE.FABRICWATCHSTATUSTEMPDEVICE.RBRIDGEID TEMPDEVICE.IPADDRESS TEMPDEVICE.ISROUTER, TEMPDEVICE.ISSLBTOTIMESTAMPTEMPDEVICE.FIRSTSEENTIME,YYYYMMDDHH24MISS as TEMPDEVICE.FIRSTSEENTIMEPortbottleneckconfinfo PortbottleneckstatinfoPortgroupinfo Portprofileinfo RoleprivilegeinfoPortprofile PortprofileinterfaceinfoPortprofilemacinfo PORTPROFILE.ACTIVATED PORTPROFILEQOSMAP.DCBMODEPortvlaninfo ProtocolvlaninfoSflow SFLOWMINUTEL3VIEW SflowminutemacviewScomeemonitorinfo Sensorinfo EemonitorSOURCEPORT.ID = EEMONITOR.SOURCEPORTID Smartcardusageinfo SWITCHCONFIG.ID= SWITCHCONFIGDETAIL.SWITCHCONFIGID SwitchconfiginfoSwitchdetailsinfo SWITCHCONFIG, SwitchconfigdetailVIRTUALSWITCH.FMSMODE CORESWITCH, VIRTUALSWITCH, FABRICMEMBER, Coreswitchdetails VIRTUALSWITCH.MANAGEDELEMENTIDDEVICE.IPADDRESS, DEVICE.DEVICEID SwitchdiscoveredmacinfoSwitchportinfo SWITCHPORT.IDCORESWITCH.TYPE as Switchtype Switchsnmpinfo Timeseriesdatainfo TIMESERIESDATA12HOUR.MEASUREID TimeseriesdataviewUnion ALL From timeseriesdatainfo tsdTrillinfo Trilltrunkinfo UserroleresourceinfoVirtualfcoeportinfo Virtualportwwndetails CORESWITCHDETAILS.CORESWITCHID = CORESWITCH.IDVIRTUALPORTWWNDETAILS.SWITCHID VirtualportwwndetailsinfoVLANINTERFACERELATION.VLANDBID = PORTVLAN.VLANDBID VmaddressinfoVlanintclassifierinfo DEVICE.DEVICEIDINTERFACE.DEVICEID = DEVICE.DEVICEID VmconnectivityinfoMACGROUP.ID DEVICEMACGROUPMAPPING.MACGROUPDBID = MACGROUP.IDDEVICEENCLOSURE.ID AS Hostdbid VMPATH.HBAPORT = DEVICEPORT.WWNVmnetworkconnectivityinfo DEVICE.MANAGEDELEMENTID VMSTDVSWITCHPORTGROUP.VMSTANDARDVIRTUALSWITCHIDPnicmac VMHOSTENDDEVCONNECTIVITY.INTERFACEIDVMHOST.DEVICEENCLOSUREID SwitchnameVMPATH.HBAPORTBPCHAR = SOURCEPORT.WWN VmdatastoredetailsinfoVmeemonitorinfo Vmpath VmvirtualmachineVmluninfo VmhostinfoVmstatisticsinfo SWITCHPORT.PORTID SWITCHPORT.PORTNUMBER SWITCHTEPORTSTATS.TRANSMITOK SWITCHTEPORTSTATS.RECEIVEOKVMPATH.HBAPORTBPCHAR = DEVICEPORT.WWN VCEMPROFILE.DISCOVERYSTATUS VrconnmoduleinfoVRCONNMODULE.ID VRCONNMODULE.VRCONNDOMAINID VRCONNDOMAIN.FIRMWAREVERSIONUnion Select distinct VRCONNMODULE.ID Vrconnnpivinfo VrconnmoduleportinfoVmmdiscoveredmacinfo DEVICENODE.FABRICID USERDEFINEDDEVICEDETAIL.NAMEUSERDEFINEDDEVICEDETAIL.WWN = VRCONNWWN.PORTADDRESS Vmvirtualethernetadapterinfo Events ZONEDB.ID = ZONEDBCONFIG.ZONEDBIDZonedbinfo ApusageSflowminutebgpview SflowminutevlanviewPhysicaldeviceinfo Slotinfo ManagedelementinfoSnmpdatainfo Snmpdataview SnmpexprdatainfoWhere sw.id = sp.virtualswitchid = de.managedelementid Device PHYSICALINTERFACE, Physicalport VmvnetworkinfoVcsclustermemberinfo Resetvcslicensed $BODY$Trilltrunkgroup Select WirelessinterfaceWiredinterface CEEPORT.AMPPPROFILEMODE CeeportinfoL3.SUBNETMASK DeviceipaddressCEEPORT.GIGEPORTID = GIGEPORT.ID 1688 53-1003056-01 Access levels defined IndexAmpp CNA EMC, 354 HP LAN, 355 IBMHosts, 101 CUP, Ficon1692 53-1003056-01 Ficon FTPGslb State, 102 Mstp MonitorRbac New device, adding nameNOS Columns, 284 product overview, 453 products1043 SVI 1699 WWN Edit, 8801701