Brocade Communications Systems IP250 user manual 770 53-1003056-01

24 Creating a payload configuration

FIGURE 297 Configuration dialog box - Deployment Targets pane

6.In the Available Targets list, select the products, product groups, and IP subnets to which the payload configuration is to be deployed.

•To select a target, expand the entry to display the entries under it, click the target in the Available Targets list, and click the right-arrow button to move it to the Selected Targets list.

If the target is not on the list, run the discovery process.

NOTE

The Deployment Targets pane of the Configuration wizard does not include VCS devices when launched from the Configuration Wizard command on the Configure menu.

•To remove a target, select it in the Selected Targets list and click the left arrow button to move it back to the Available Targets list.

7.Click Next.

The Deployment Properties pane displays, as shown in Figure 298 on page 771.

770	Brocade Network Advisor IP User Manual
	53-1003056-01