Brocade Communications Systems IP250 user manual CLI Templates Network OS Create Lldp Profile

G	CLI Templates
		TABLE 46	Network OS – Create LLDP Profile
		Feature	Description	CLI Commands
		QoS	This template is used to create LLDP	protocol lldp
			profile and configure LLDP profile	profile $<profileNameSTRING>
			parameters	description $<descriptionSTRING>
				hello $<frequencyINTEGER>
				multiplier $<holdTimeINTEGER>
				advertise dcbx-fcoe-logical-link-tlv
				advertise dcbx-fcoe-app-tlv
		TABLE 47	Network OS – Create Port Profile
		Feature	Description	CLI Commands
		AMPP	Creates the port profile and its sub	port-profile $<ProfileNameSTRING>
			profile.	! create vlan profile in access mode
				vlan-profile
				switchport
				switchport mode access
				switchport access vlan $<AccessVlanIdINTEGER>
				exit
				! create qos-profile
				qos-profile
				cee default
				exit
				!create security-profile
				security-profile
				mac access-group $<ACLNameSTRING> in
				exit
				exit
				! activate port profile
				port-profile $<ProfileNameSTRING> activate
				! associate mac statically
				port-profile $<ProfileNameSTRING> static
				$<AssosicateMACAddress1MAC>
				port-profile $<ProfileNameSTRING> static
				$<AssosicateMACAddress2MAC>
				port-profile $<ProfileNameSTRING> static
				$<AssosicateMACAddress3MAC>
		TABLE 48	Network OS – Create Traffic Class Map
		Feature	Description	CLI Commands
		QoS	This template is used to create the	qos map cos-traffic-class $<MapNameSTRING>
			CoS-Traffic-Class mapping by	$<MapValueSTRING>
			specifying a name and the mapping
		TABLE 49	Network OS – Create VLAN Classifier Group
		Feature	Description	CLI Commands
		QoS	This template is used to create a	vlan classifier group $<GroupIdINTEGER> add rule
			VLAN classifier group and add a	$<RuleIdINTEGER>
			VLAN classifier

1348	Brocade Network Advisor IP User Manual
	53-1003056-01