Sharp Error Messages, ErrorMessages, References, IM-DR420HETINSE0554AWZZ, Meaning, Batt Empty

IM-DR420H

Error Messages

References -Error Messages-

52

ERROR	MEANING
MESSAGES
BATT EMPTY	" The battery has run down.
BLANK MD	" Nothing is recorded.
	(Replace the disc with a recorded disc.)
Can't COPY	" You tried to record from a copy pro-
	hibited MiniDisc.
	(Record using the analogue cable.)
	" You tried to record signals other than
	music (such as data).
Can't EDIT	" A track cannot be edited.
	(Change the stop position of the track
	and then edit it.)
Can't LOCK	" You tried to remove the MD whilst re-
	cording or editing.
Can't PLAY	" You tried to play back a track that
	cannot be played with this equip-
	ment.
Can't READ	" The disc data cannot be read be-
(*)	cause the disc is damaged.
	(Reload the Minidisc or replace it with
	another one.)
Can't REC	" Recording cannot be performed cor-
	rectly due to vibration or shock.

ERROR	MEANING
MESSAGES
Can'tSTAMP	" Stamp function does not work.
	(Check the number of tracks.)
Can'tWRITE	" Cannot save the TOC information
	correctly to a MiniDisc.
DEFECT!	" The disc is scratched.
	(If the recorded sound is not right, retry
	recording or replace the disc with a re-
	cordable one.)
DISC FULL	" The disc is out of recording space.
Er-MD (**)	" The microprocessor has reported a
	system fault and the unit is out of or-
	der.
	(To have it repaired, go to the distributor
	where you purchased the unit.)
HOLD	" The unit is in the hold mode.
LOCKED	" You removed a MiniDisc whilst re-
	cording or editing.
	(Turn off the power before removing the
	MiniDisc.)
NO DISC	" A disc has not been loaded.

A number or symbol appears in (*) position.

IM-DR420H(E) TINSE0554AWZZ

03/7/21 IM-DR420H_UK_6.fm