Sharp IM-DR420H Hold Function, IM-DR420HETINSE0554AWZZ, 03/7/21 IM-DR420H UK 2.fm

IM-DR420HHold Function

Hold Function-

Preparation

The operation can be kept even if other buttons are accidentally pressed in a place such as a crowded train. (The main unit and remote control operate independently.)

Move the HOLD switch to the safety position (direction indicated by the arrow).

Orange mark

Hold Release

Hold down the HOLD button for 2 seconds or more.

-

HoldRelease

If the battery is inserted or the AC adaptor is connected, you can set this function even when the power is turned off.

To cancel the hold mode

Press and hold down the HOLD button for 2 seconds or more whilst the unit is in the hold mode.

"HOLD OFF" will be shown.

To cancel the hold mode

Move the HOLD switch away from the safety position (the opposite direction of the arrow).

If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be drained.

16

IM-DR420H(E) TINSE0554AWZZ

03/7/21 IM-DR420H_UK_2.fm