Sharp IM-DR420H operation manual Volume control, Bass control, To customise low and high levels

"Volume control

Press the VOL + button to increase
the volume and the VOL - button to
decrease the volume.	Volume (0 - 30)

The sound escaping from your earphones may annoy people around you. In particularly crowded places (such as on trains or buses), reduce the volume.

"Bass control

Each time the BASS/SYNC (BASS) button is pressed, the bass response will be switched as follows.

BASS 1	Emphasised slightly.
BASS 2	Emphasised more.
BASS 3	Emphasised fully.
BASS OFF	Cancelled. (Default setting)

"To customise low and high levels

You can set 3 types of bass settings (BASS 1 - BASS 3) by adjusting low (Lo) and high (Hi) boost for each setting.

Emphasising low (Lo) and high (Hi) sound of BASS 3.

IM-DR420H

1	During playback, press the MENU/ENTER
	button.
2	Press the		or	button repeatedly to se-
	lect "SOUND ADJ" and then press the
	MENU/ENTER button.
3	Press the		or	but-	OperationBasic	-Playback-
	ton repeatedly to select
	bass	setting, and the B3
	VOL + or VOL - button to
	select "B3".
4	After	selecting		"Lo" or
	"Hi"	with	the	or
	button, press the VOL +
	or VOL - button to adjust
	the low or high sound
	setting.
5	Press the MENU/ENTER button.

Repeat steps 1 - 5 to change the other bass setting.

4

6

5

4

BASS 3

Sound level

Lo5 Hi5

Default

Lo Frequency Hi

Notes:

!If you set the volume to 23 or more, the bass boost will be adjusted automatically.

!When you make the setting of "To customise low and high levels" with the volume level set to 23 or more, the volume level will be reduced to 22 automatically.

21

3

2

1

IM-DR420H(E) TINSE0554AWZZ

03/7/21 IM-DR420H_UK_3.fm