Sharp Net MD, Checking the USB driver, Connecting to a, IM-DR420HETINSE0554AWZZ, Windows2000

Caution:

"The operation is not guaranteed if 2 or more USB devices are connected to your PC.

"Insert the USB connection cable directly into the USB port on the PC. We do not guarantee the operation with it connected via a USB hub, etc.

"When connecting the MD portable recorder, discon- nect all the other USB devices from the PC. The sound may skip if they are connected.

"It is recommended that the MD portable recorder be used with an AC adaptor.

"If the power supply to the PC or the MD portable recorder stops during the operation of this system, TOC information may not be written on the MD. If it occurs, restart the operation from the beginning.

"We do not guarantee the operation with the self built computers or modified motherboards.

"If cables such as an extension cable or two-way cable is connected instead of a connection cable, the line quality will be degraded and the software may not operate properly.

"When connecting the unit to your PC, use a battery as well as an AC adaptor. It not only prevents data loss from disconnection, but also speeds up data writing to MD.

IM-DR420H

!Checking the USB driver

Whilst the MD portable recorder is connected to the com- puter, after clicking "Control Panel" "System", select the "Hardware" tab and click "Device Manager" to check the following device name.

"Universal Serial Bus controllers

	Net MD	PC-
Net MD		Connecting to a
		-

Windows 2000:

Open "System" in "Control Panel", select the "Hardware" tab and click "Device Manager".

Windows 98 Second Edition:

Open "System" in "Control Panel", and click the "Device Manager".

7

6

5

4

3

2

1

IM-DR420H(E) TINSE0554AWZZ

49

03/7/21 IM-DR420H_UK_6.fm