Master MiniDisc operation 1 Insert a master MiniDisc.
Do not mistake the master MiniDisc for the target one.
2 Whilst in the stop mode, press the MENU/ ENTER button.
3 Press the 
or 
button repeatedly to se- lect "EDIT".
4 | Press the MENU/ENTER button. | |||
5 | Press the | or but- |
| |
| ||||
| ton repeatedly to se- |
| ||
|
| |||
6 | lect "NAME STAMP". | |||
Press the | MENU/EN- |
| ||
| ||||
| TER button. |
|
|
|
|
|
|
| |
To cancel the operation, press the 
:OFF/HOLD but- ton.
7 Press the MENU/ENTER button.
8 When the unit displays "CHANGE MD", re- move the master MiniDisc.
Remove it without turning off the power. Or, the oper- ation will be cancelled.
Operation of the MiniDisc for stamping 9 Load a MiniDisc for stamping.
10Press the MENU/ENTER button.
The unit will finish recording the character information and enter the stop mode.
Note:
If the total number of tracks on the master MiniDisc does not match that on the MiniDisc for stamping, the unit will display "Can'tSTAMP" and turn off.
If this happens, adjust the total number of tracks on the newly recorded MiniDisc using the edit operation.
Advanced Features | |
|
|
39
6
6
5
4
3
2
1
03/7/21
