Sharp IM-DR420H Recording, About track numbers, About sampling rate converter, Useful -Advanced

IM-DR420H

Advanced Recording (continued)

Recording-

Features

!About track numbers

1.Track numbers are created automatically during re- cording via the analogue connection when a silence of 1 second or more is detected (auto marker function). A series of tracks can be recorded as one by disabling the auto marker function (see page 27).

About 1 second

Silence

First track Second track

"When recording, if a programmed playback is per- formed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source.

"Track numbers may not be created properly, depend- ing on the connected stereo system.

!About sampling rate converter

This portable MD incorporates a sampling rate converter so that it can record from digital radios or DAT tape recorders.

!Note for digital recording

Useful -Advanced

2.When recording from a CD or a MiniDisc using the dig- ital connection, track numbers will be created at the same points as on the CD or MiniDisc (synchro mark- er function).

Playback	First track	Second track	Third track
side	Track A	Track B	Track C
	First track	Second track	Third track
Recording
side	Track A	Track B	Track C

"Track numbers may not be created in proper places, depending on the source to be recorded from, such as signals with noise.

"The track numbers on the playback side may not match the track numbers recorded on the MiniDisc.

You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analogue inputs is not affected.

Digital signals	Digitally recorded Cannot record
	MiniDisc

CD player,

MiniDisc

player,

etc.DigitalDigital

connection connection

28

IM-DR420H(E) TINSE0554AWZZ

03/7/21 IM-DR420H_UK_4.fm