Brocade Communications Systems IP250 Selecting a product, Duplicating a configuration condition

36 Configuration rules

•Not Matches — Select this option from the list if you do not want the configuration line to match the line in the device configuration file.

11.Enter one or more configuration lines with which you want to compare the device configuration in the Configuration text box.

12.Select the Lines in exact order check box to match the configuration lines in the same order in the Configuration text box as the device configuration.

Clear the Lines in exact order check box to search and match each configuration line in the Configuration text box.

13.Enter details to correct the failure, if the condition fails, in the Remediation text box.

Remediation content displays in the Configuration Rule Report for each failed condition. The remediation detail cannot be over 1024 ASCII characters.

14.Click OK on the Add Condition dialog box.

15.Click OK on the Add Configuration Rule dialog box.

16.Click OK on the Add Monitor dialog box.

The updated policy monitor displays in the Monitors table of the Policy Monitor dialog box.

17.Click Close on the Policy Monitor dialog box.

Selecting a product

You can only select one product at a time.

1.From the Add Condition dialog box, click the Product ellipsis button to select a product. The Select Product dialog box displays.

2.Select a product from the Available Products list, and click the right arrow button to move the product to the Selected Product table.

The Available Products list contains the same fields as the IP Product list (refer to “IP Product List” on page 284).

3.To remove a product from the Selected Product list, select the product and click the left arrow button to move the product to the Available Products list.

The Selected Product list contains the same fields as the IP Product list (refer to “IP Product List” on page 284).

4.Click OK on the Select Product dialog box.

Duplicating a configuration condition

Enables you to create a new condition based on a predefined or user-defined condition.

1.Select Monitor > Policy Monitor.

The Policy Monitor dialog box displays.

2.Click Edit.

The Edit Monitor dialog box displays.

3.Click the Switch/Router Checks tab.

1126	Brocade Network Advisor IP User Manual
	53-1003056-01