Brocade Communications Systems IP250 user manual Modifying a payload configuration

Modifying a payload configuration 24

FIGURE 301 Configuration dialog box - Select Payload pane for editing a configuration

4.Add or remove payloads in the configuration.

•To add a payload to the configuration, select either Product Payloads or Interface Payloads, and then select the payload you want to add.

•To remove a payload from the configuration, clear the check box of the payload.

Note that a configuration must have at least one payload. You cannot save a configuration unless it has at least one payload.

5.Modify what needs to be changed in the Select Payload, Deployment Targets, Deployment Properties, and other panes.

•Click Next to navigate sequentially through the panes.

•Click an item in the Steps area to jump directly to the appropriate section.

•Click Save at any time to save your changes and return to the Configuration Wizard dialog box.

Refer to the steps in “Creating a payload configuration” on page 767 for additional information.

Brocade Network Advisor IP User Manual	775
53-1003056-01