Brocade Communications Systems IP250 user manual Top Port Encode Error Out monitor

Performance monitors 7

•Status — The port status (for example, Up).

•Refreshed — The time of the last update for the monitor.

To customize the monitor to display data by a selected time frame as well as customize the display options, refer to “Editing a preconfigured performance monitor” on page 263.

Accessing additional data from the Top Port Discards monitor

•Right-click a row in the monitor to access the shortcut menu available for the associated device. For more information about shortcut menus, refer to “Application menus” on page 1261.

•Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more information, refer to “Performance Data” on page 969.

Top Port Encode Error Out monitor

The Top Port Encode Error Out monitor (Figure 98) displays the top ports with encoding errors outside of frames in a table.

FIGURE 98 Top Port Encode Error Out monitor

The Top Port Encode Error Out monitor includes the following data:

•Severity icon/monitor title — The worst severity of the data based on the error count shown next to the monitor title.

•Port — The port affected by this monitor.

•Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) — Displays one of the following:

-Connected Port — The ISL or IFL port on the connected device. Click to launch the switch port properties dialog box.

-Initiator — The initiator port on the connected device. Click to launch the device properties dialog box.

-Target — The target port on the connected device. Click to launch the device properties dialog box.

Brocade Network Advisor IP User Manual	245
53-1003056-01