16 LLDP-DCBX configuration

Editing an LLDP profile

1.Select Configure > DCB.

The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and functions.

2.Select a switch, and click Edit.

3.Click the LLDP-DCBXtab on the Edit Switch dialog box. The LLDP-DCBX Profile dialog box displays.

4.Select an LLDP profile in the LLDP Profile list.

NOTE

You can edit the <Global Configuration> profile. You cannot, however, delete or duplicate global configurations.

5.Click the left arrow to load the LLDP profile’s values in the left pane.

6.Modify the values, as described in “Adding an LLDP profile” on page 515. You are not allowed to modify the LLDP profile’s name.

7.Click the right arrow to update the LLDP profile parameters.

8.When you have finished the configuration, click OK to launch the Deploy to Products dialog box.

Deleting an LLDP profile

1.Select Configure > DCB from the menu bar.

The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and functions.

2.Select a switch, and click Edit.

3.Click the LLDP-DCBXtab on the Edit Switch dialog box.

4.Select an existing LLDP profile from the LLDP Profiles list in the upper right pane.

NOTE

You cannot delete <Global Configurations>. You can, however, edit global configurations. For more information, refer to “Product configuration templates” on page 779.

5.Click the left arrow button.

The selected LLDP profile is removed from the list.

6.When you have finished the configuration, click OK to launch the Deploy to Products dialog box.

7.Click OK.

The Deployment Status dialog box launches.

8.Click Start on the Deployment Status dialog box to save the changes to the selected devices.

9.Click Close to close the Deployment Status dialog box.

516

Brocade Network Advisor IP User Manual

 

53-1003056-01

Page 568
Image 568
Brocade Communications Systems IP250 user manual Editing an Lldp profile, Deleting an Lldp profile