Brocade Communications Systems IP250 user manual Add Policy Monitor dialog box, Hosts Checks tab

36 Adding a policy monitor

FIGURE 461 Add Policy Monitor dialog box, Hosts Checks tab

a.Select the Check for redundant connections to attached fabrics check box to determine if there are at least the minimum number of configured physical connections between the host and the attached fabric.

The default is 2. For more information about this check and a fix for rule violations, refer to “Host policy monitors” on page 1103.

b.Enter the minimum number of connections between the host and the attached fabric in the Minimum Connections field.

The default is 2.

c.Select the Check for connections through two fabrics to each target LUN check box to determine if there are redundant connections between the host group and the target LUN.

For more information about this check and a fix for rule violations, refer to “Host policy monitors” on page 1103.

d.Select the hosts to which you want to apply this policy in the Available Hosts list and click the right arrow button.

NOTE

You can use the All Host target in the Available Hosts list for future provisioning. Select All Hosts and click the right arrow button to apply this policy to all discovered hosts.

The selected hosts display in the Selected Hosts list.

9.To set policy monitors for the Management application (Figure 462), complete the following steps.

1112	Brocade Network Advisor IP User Manual
	53-1003056-01