Brocade Communications Systems IP250 user manual Creating a new Gslb controller configuration

30 Controller configuration

Creating a new GSLB controller configuration

1.Select Configure > Application Delivery > GSLB.

1.Click the Controller Configuration tab of the GSLB dialog box to view the controller definitions that have been defined for the system.

2.Click Add to create a new GSLB controller configuration, or select an existing GSLB controller configuration and click Edit or Duplicate.

The Controller Configuration dialog box displays, as shown in Figure 383.

FIGURE 383 Controller Configuration dialog box

1.Enter a name for the configuration in the Configuration Name field. The combination of a GSLB controller name and the Management application user who created the definition must be unique.

2.Select the ServerIron ADX product from the Controller list that will be the GSLB controller.

3.Select the controller policy from the Controller Policy list that will be deployed to the controller. The list comes from the list on the Policy Configuration tab.

4.Enter the GSLB Communication Port number that the controller ServerIron ADX product will use for the GSLB protocol in the GSLB Communication Port field. This parameter setting is deployed to the controller and to site ServerIron ADX products specified in this configuration.

5.Select the Reload on Deployment check box if you want the ServerIron ADX product to perform a software reload when this configuration is deployed to the selected products.

6.Select the Enable Logging check box if you want to enable logging of the following information for DNS requests assisted by the GSLB ServerIron ADX product:

938	Brocade Network Advisor IP User Manual
	53-1003056-01