Brocade Communications Systems IP250 user manual Configuring an hourly policy monitor schedule

36 Policy monitor scheduling

Configuring an hourly policy monitor schedule

To configure an hourly schedule, complete the following steps.

1.Select Hourly from the Frequency list.

2.Select the minute past the hour you want deployment to run from the Minutes past the hour list.

Where the minute value is from 00 through 59.

3.Click OK on the Schedule Properties dialog box.

To finish configuring the policy monitor, return to step 6 of “Adding a policy monitor” on page 1108.

Configuring a daily policy monitor schedule

To configure a daily deployment schedule, complete the following steps.

1.Select Daily from the Frequency list.

2.Select the time of day you want deployment to run from the Time (hh:mm) lists.

Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the day or night value is AM or PM.

3.Click OK on the Schedule Properties dialog box.

To finish configuring the policy monitor, return to step 6 of “Adding a policy monitor” on page 1108.

Configuring a weekly policy monitor schedule

To configure a weekly schedule, complete the following steps.

1.Select Weekly from the Frequency list.

2.Select the time of day you want deployment to run from the Time (hh:mm) lists.

Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the day or night value is AM or PM.

3.Select the day you want deployment to run from the Day of the Week list.

4.Click OK on the Schedule Properties dialog box.

To finish configuring the policy monitor, return to step 6 of “Adding a policy monitor” on page 1108.

Configuring a monthly policy monitor schedule

To configure a monthly schedule, complete the following steps.

1.Select Monthly from the Frequency list.

2.Select the time of day you want deployment to run from the Time (hh:mm) lists.

1114	Brocade Network Advisor IP User Manual
	53-1003056-01