Brocade Communications Systems IP250 Creating a payload configuration, Payload name Description

Creating a payload configuration 24

TABLE 79 Payloads available for deployment (Continued)

Payload name	Description
TACACS+ Servers	Indicates which TACACS/TACACS+ servers are to be used for authentication.
Telnet	Sets Telnet password and idle timeout value, and enables Telnet
	authentication on devices for use with AAA authentication.
Time Zone/SNTP	Specifies the time zone and specifies whether the date and time are to be set
	by an SNTP server clock.
User Accounts	Configures accounts for users and administrators who are allowed to access
	the product.
Interface Payloads:
LDP Settings	Configures LDP settings on an interface.
PoE Control	Powers up and powers down an interface that can be powered up over an
	Ethernet connection.
Port	Changes basic port parameters in VLAN Manager.
sFlow Configuration	Enables and configures sFlow on a device, globally or per interface
SNMP Trap for Port	Specifies whether a link-change trap is sent if the state of a port changes.

Creating a payload configuration

The Configuration Wizard facilitates the creation and deployment of payload configurations.

1.Select Configure > Configuration Wizard.

2.Click Add.

The Select Payload pane displays, as shown in Figure 295. This pane displays all of the payloads you can deploy to wired devices.

Payloads are grouped under Product Payloads or Interface Payloads. Product payloads are deployed to the devices, whereas interface payloads are deployed to ports.

Brocade Network Advisor IP User Manual	767
53-1003056-01