Brocade Communications Systems IP250 user manual 53-1003056-01

Management server and client 1

c. Click Next.

6.Complete the following steps on the Server Configuration screen.

NOTE

Do not use port 2638 for any of these port numbers. Port 2638 is used internally by the server.

FIGURE 3 Server Configuration screen

a.Enter a port number in the Web Server Port # (HTTPS) field (default is 443).

b.Enable HTTP redirection to HTTPS by selecting the Redirect HTTP Requests to HTTPS check box.

When you enable HTTP redirection, the server uses port 80 to redirect HTTP requests to HTTPS. You can configure the server port settings from the Options dialog box (Server Port pane). For instructions, refer to “Configuring the server port” on page 177.

c.Enter a port number in the Database Port # field (default is 5432).

d.Enter a port number in the Starting Port Number field (default is 24600).

NOTE

For Professional software, the server requires 15 consecutive free ports beginning with the starting port number.

NOTE

For Trial and Licensed software, the server requires 18 consecutive free ports beginning with the starting port number.

e.Enter a port number in the Syslog Port Number field (default is 514).

NOTE

If the default syslog port number is already in use, you will not receive any syslog messages from the device. To find and stop the process currently running on the default Syslog port number, refer to the Installation and Migration Guide.

f.Enter a port number in the SNMP Port Number field (default is 162).

g.Click Next.

If you enter a syslog port number already in use, a message displays. Click No on the message to remain on the Server Configuration screen and edit the syslog port number (return to step 6a). Click Yes to close the message and continue with step 7.

Brocade Network Advisor IP User Manual	7
53-1003056-01