Brocade Communications Systems IP250 user manual Removing a syslog recipient, Syslogs

37 Syslogs

FIGURE 478 Syslog Recipients dialog box

2.Select Add from the Action list.

3.Enter the IP address of the syslog port (the recipient server) in the Recipient IP Address field. This is a mandatory field. IPv4 addresses are accepted, but a DNS name is not accepted.

4.Enter the syslog port of the recipient in the Recipient Port field. Valid numeric values range from 1 through 65535. The default value is 514.

NOTE

For IronWare products, a non-default port can be registered. For Network OS and Fabric OS products, non-default ports cannot be registered.

5.Select the fabric or switches from the Available list and click the right arrow button to move it to the Selected list. You can select multiple products.

NOTE

For IP products, only switches are available to select.

6.Click OK.

The Management application registers the recipient IP address as a syslog recipient.

Removing a syslog recipient

To remove a syslog recipient, complete the following steps.

1.Select Monitor > Syslog Configuration > Syslog Forwarding. The Syslog Recipients dialog box displays.

2.Select Remove from the Action list.

3.Enter the IP address of the syslog port (the recipient server) in the Recipient IP Address field.

4.Select the fabric or switches from the Available list.

5.Click OK.

1162	Brocade Network Advisor IP User Manual
	53-1003056-01