Brocade Communications Systems IP250 Adding SNMPv3 credentials, HMACMD5 Hmacsha, Cbc-Des

3 IP SNMP credentials

Adding SNMPv3 credentials

To add SNMPv3 read-write credentials, complete the following steps.

1.Select Discover > IP Products.

The Discover Setup - IP dialog box displays.

2.Click the Global Settings tab.

3.Click the SNMP tab.

FIGURE 13 SNMPv3 credentials

4.Enter a unique label to identify the credentials in the Display Label field of the Add/Edit SNMPv3 Read-Write Credentials area.

This label can be from 1 through 16 characters long, case sensitive, and allows all printable ASCII characters.

5.Enter the SNMPv3 user name in the User ID field.

The user name can be from 1 through 16 characters long, case sensitive, and allows all printable ASCII characters.

6.Select one of the following protocols from the Authentication Protocol list:

•None

•HMAC_MD5

•HMAC_SHA

7.Enter the SNMPv3 authentication password in the Authentication Password field.

The password can be from 8 through 16 characters long, case sensitive, and allows all printable ASCII characters. The password displays as asterisks.

8.Select one of the following protocols from the Privacy Protocol list:

•None

•CBC-DES

•CFB_AES-128

If you select a privacy protocol, the selected protocol encrypts the SNMP request and response packets.

9. Enter the privacy password in the Privacy Password field.

48	Brocade Network Advisor IP User Manual
	53-1003056-01