Brocade Communications Systems IP250 user manual Clearing MAC filter assignments

18 Media Access Control (MAC) filter management

Clearing MAC filter assignments

To clear a MAC filter assignment from a port or product, complete the following steps.

1.Select Configure > Security > MAC Filter > Port. The Port Selection - MAC Filter dialog box displays.

2.Select the port you want to clear the MAC filter from in the Available Ports list and click the right arrow button.

You can select more ports or products from the Deploy to Ports - MAC Filter dialog box.

3.Click OK on the Port Selection - MAC Filter dialog box.

The Device_Name - Port_Number - MAC Filter Configuration dialog box displays.

4.Select the Clear MAC Filter Assignment option.

5.Click OK on the Device_Name - Port_Number - MAC Filter Configuration dialog box.

The Deploy to Ports - MAC Filter dialog box displays. To deploy the configuration, refer to “Deploying a security configuration on demand” on page 630.

Adding a MAC filter configuration to an interface

To add a MAC filter configuration to an interface, complete the following steps.

1.Select Configure > Security > MAC Filter > Port. The Port Selection - MAC Filter dialog box displays.

2.Select the port or trunk you want to add to the MAC filter in the Available Ports list and click the right arrow button.

3.Click OK on the Port Selection - MAC Filter dialog box.

The Device_Name - Port_Number - MAC Filter Configuration dialog box displays.

4.Select the Assign MAC Filter option.

5.Choose one of the following options from the first list:

•MAC Filters bound to this interface — Select to assign an ACL deployment saved on the port.

•From the Product — Select to assign an MAC filter deployment saved on the product.

•Deployment_Name — Select to assign a user-configured deployment on the port.

6.Select the MAC filter number from the second list.

7.Click Add.

The MAC filter you selected displays in the MAC Filters table. Repeat step 5 through step 7 for each MAC filter you want to assign to the port.

8.Click OK on the Device_Name - Port_Number - MAC Filter Configuration dialog box.

The Deploy to Ports - MAC Filter dialog box displays. To deploy the configuration, refer to “Security configuration deployment” on page 629.

628	Brocade Network Advisor IP User Manual
	53-1003056-01