Brocade Communications Systems IP250 Creating a DCB map to carry the LAN and SAN traffic

DCB configuration 16

For more information about fabric cluster mode and logical chassis cluster mode, refer to the Network OS Administrator’s Guide and the Network OS Command Reference, versions 4.0 or later.

The term VCS mode refers to both fabric cluster mode and logical chassis cluster mode unless otherwise indicated.

NOTE

In the Management application, a logical chassis cluster is shown without all its members; a fabric cluster is shown with all its members.

Creating a DCB map to carry the LAN and SAN traffic

To create a DCB map to carry the LAN and SAN traffic, complete the following steps.

NOTE

This procedure is applicable for Fabric OS versions earlier than Fabric OS 7.0. For Fabric OS versions 7.0 and later, you can only edit the default DCB map.

1.Select Configure > DCB.

The DCB Configuration dialog box displays.

2.Select the switch to edit from the Products/Ports list and click Edit. The Edit Switch dialog box displays.

3.Click the QoS tab.

The Edit Switch dialog box - QoS tab displays, as shown in Figure 182.

FIGURE 182 Edit Switch dialog box - QoS tab

4.Select DCB from the Map Type list.

5.Configure the following DCB Map parameters in the DCB Map area:

Brocade Network Advisor IP User Manual	489
53-1003056-01