Brocade Communications Systems IP250 user manual Enabling a historical data collector

33 IP historical performance monitoring

Enabling a historical data collector

Use the following steps to enable a data collector to collect historical data or disable a data collector from collecting data.

1. Select an historical data collector on the Historical Data Collectors dialog box.

•If the collector is disabled, the Enable button is active.

•If the collector is enabled, the Disable button is active.

2.Click Enable to enable the collector.

3.Click Disable to disable the collector.

Adding or editing a historical data collector

Use the following procedure to add or edit a historical data collector using the Data Collector wizard.

NOTE

There are specific options that you can edit for system collectors. Refer to “Editing system collectors” on page 996 for details.

1.Select Monitor > Performance > Historical data collectors. The Historical Data Collectors dialog box displays.

2.Perform either of the following steps:

•Select a collector and click the Edit button.

The Data Collector wizard Collector Basics dialog box displays where you can edit values for the existing collector.

•Click the Add button

The Data Collector wizard Collector Basics dialog box displays where you can add values for a new collector.

998	Brocade Network Advisor IP User Manual
	53-1003056-01