Brocade Communications Systems IP250 user manual Registering traps, Snmp traps

37 SNMP traps

Registering traps

Traps must be registered in the Event Reception dialog box to make them available.

To register traps, complete the following steps.

1.Select Monitor > SNMP Setup > Event Reception.

2.Click the Trap Configuration tab.

The Trap Configuration tab of the Event Reception dialog box, shown in Figure 477, displays.

The Registered and Not Registered buttons at the top of the Traps tree serves as a filter for the traps. If there are unregistered traps, they are listed when you select the Not Registered button.

Traps appear under each MIB folder. The MIB folders correspond to the MIBs identified in the mibs_to_compile.txt file.

FIGURE 477 Trap Configuration tab of the Event Reception dialog box

3.Expand a folder for a MIB to display the traps in the MIB. If the list is too long, use the Search tool to find a MIB or trap.

4.Select the trap you want to register.

The SNMP name and Object Identification (OID) of the trap appear at the top line of the configuration pane. Also, the status of the trap shows Not Registered, which is the default definition of the trap.

Details about the trap appear in the fields beneath the MIB Name field.

1158	Brocade Network Advisor IP User Manual
	53-1003056-01