IP sFlow configuration

33

8.If you do not chose the Prompt check box, complete the following for each field.

-Source VM — Enter the name, IP address, or MAC address of the source VMs in comma separated value (CSV) format or click the ellipsis button to the right of the field to select the VMs from the Select VMs dialog box.

-Destination VM — Enter the name, IP address, or MAC address of the destination VMs in comma separated value (CSV) format or click the ellipsis button to the right of the field to select the VMs from the Select VMs dialog box.

-Source VM Host — Enter the name or IP address of the source VM hosts in comma separated value (CSV) format or click the ellipsis button to the right of the field to select the VM hosts from the Select VM Hosts dialog box.

-Destination VM Host — Enter the name or IP address of the destination VM hosts in comma separated value (CSV) format or click the ellipsis button to the right of the field to select the VM hosts from the Select VM Hosts dialog box.

9.Select the Layer 2 tab.

FIGURE 427 Add Report Definitions dialog box, Layer 2 tab

10.Examine each listed item and decide the following:

-Do you want to enter values in the field, or be prompted to enter the value when running the report? If you want to be prompted, select the Prompt check box.

-If you choose to list values in the field, would you rather include or exclude the listed values? The selector next to the field may be used to include (=) or exclude (!=) the values.

-Are the values relevant to the design of your report? If not, leave the fields blank.

11.If you do not chose the Prompt check box, complete the following for each field.

-Source MAC Address — Enter the source MAC addresses in comma separated value (CSV) format or click the ellipsis button to the right of the field to select the MAC addresses from the Source MAC Address Selector dialog box.

-Destination MAC Addresses — Enter the destination MAC addresses in comma separated value (CSV) format or click the ellipsis button to the right of the field to select the MAC addresses from the Destination MAC Address Selector dialog box.

-Source VLAN Numbers — Enter the source VLAN numbers in comma separated value (CSV) format.

-Destination VLAN Numbers — Enter the destination VLAN numbers in comma separated value (CSV) format.

-Input Priority (QoS priorities for inbound traffic) — Enter the input priority (O - 7).

-Output Priority (QoS priorities for outbound traffic) — Enter the output priority (0 - 7).

Brocade Network Advisor IP User Manual

1027

53-1003056-01

 

Page 1079
Image 1079
Brocade Communications Systems IP250 user manual 1027