Brocade Communications Systems IP250 Dynamic product groups, Creating a dynamic product group

4 Product group overview

Dynamic product groups

You can define a dynamic product group using the following product attributes:

•Name — The name of the product.

•IP Address — The IP address (IPv4 or IPv6 format) of the product.

•Product Type — The type of product.

•Serial # — The serial number of the product.

•Status — The status for the product and the port.

•Vendor — The name of the product’s vendor

•Model — The model number of the product.

•Firmware — The firmware version of the product.

•Build Label — The firmware build number.

•Location — The physical location of the product.

•Contact — The name of the person or group you should contact about the product.

•Description — The description of the product.

•User_defined_property1 (up to 3) — A user-defined product property value. You can create up to 3 user-defined properties (refer to “Properties customization” on page 1329).

Creating a dynamic product group

To create a dynamic product group, complete the following steps.

1.Select Network Objects from the view list on the Product List toolbar.

2.Select Add Product Group > Dynamic from the Grouping list on the Product List toolbar. The Add Product Group - Dynamic dialog box displays.

FIGURE 54 Add Product Group - Dynamic dialog box

3.Enter a unique name for the product group in the Name field.

4.Enter a description for the product group in the Description field.

116	Brocade Network Advisor IP User Manual
	53-1003056-01