Brocade Communications Systems IP250 user manual 586 53-1003056-01

18 Layer 3 access control list policy

The Add - L3 ACL Configuration dialog box displays.

3. Select Extended from the Type list.

FIGURE 217 Add - L3 ACL Configuration (Extended) dialog box

4.Enter a name or number for the ACL in the ACL Name/Number field.

5.Select Permit or Deny from the Action list.

6.Enter a description for the ACL in the Remarks field.

7.Choose one of the following options from the Source list:

•To enter an IP address, select IP Address and complete the following steps:

a.Enter the source IP address on which the ACL filters traffic in the IP Address list and text field.

b.Enter a portion of the source IP address on which the ACL filters traffic in the Wildcard Mask field.

The wildcard mask is a four-part value in IP address format consisting of ones and zeros. Use zeros in the mask if the packet source address must match the IP address. Use ones if to match any value.

For example, if you enter ‘209.157.22.26’ in the IP Address field and ‘0.0.0.255’ in the Wildcard Mask field, then all hosts in the Class C subnet ‘209.157.22.x’ match the ACL.

•To select a network, select IP Address and choose a network from the list.

To configure a network, click the ellipsis button and refer to “Network configuration” on page 602.

•To enter a host name, select Host and enter the source host name on which the ACL filters traffic in the Host list and text field.

8.Choose one of the following options from the Destination list:

586	Brocade Network Advisor IP User Manual
	53-1003056-01