Brocade Communications Systems IP250 user manual 1190 53-1003056-01

37 Pseudo events

Creating an event action with a pseudo event on the resolving policy

To create an event action with a pseudo event on the resolving policy, complete the following steps.

1.Select Monitor > Event Processing > Event Actions. The Event Actions dialog box displays.

2.Click Add to display the Identification pane of the Add Event Action dialog box.

3.Enter a name and description for the event action and select the Enabled check box to enable the event.

4.Click Next to display the Events pane.

By default, the Events pane of the Add Event Action dialog box displays.

5.Select the Pseudo Events event type from the Show list. The available pseudo events display.

6.Select the pseudo event you created and click Next.

The Sources pane of the Add Event Action dialog box displays.

7.Select the source that you will use to monitor this event from the Selected Sources list.

8.Click Next to advance to the Policy pane of the Add Event Action dialog box. The Policy pane of the Add Event Action dialog box displays.

9.Define the frequency of the event’s occurrence that would trigger the action.

•Click the Take actions for the selected event when they occur button if you want to take action for the selected events when they occur.

•Click the Take actions for the selected events based on below criteria button if you want to take action for the selected events based on specified criteria.

10.Click Next to advance to the Action Group-Actions pane of the Add Event Action dialog box. The Action Group-Actions pane of the Add Event Action dialog box displays.

11.Select Apply as a Logging Policy to indicate whether or not you want the event occurrence to be logged in the Management application database:

•Select Log to log the occurrence in the Management application database.

•Select Drop to not log the occurrence in the Management application database.

12.Click Next to advance to the Summary pane.

13.Click Finish.

For more information about adding an event action, refer to “Event action definitions” on page 1166.

1190	Brocade Network Advisor IP User Manual
	53-1003056-01