Brocade Communications Systems IP250 Editing a standard Layer 2 ACL configuration Fabric OS

18 Layer 2 access control list management

The new ACL entry displays in the ACL Entries list. To create additional ACL entries, repeat step 3 through step 9.

10.Click OK on the Add - Layer 2 ACL Configuration dialog box.

The new ACL configuration displays in the ACLs list. To create additional ACLs, repeat step 2 through step 10.

11.Click OK on the Device_Name - Layer 2 ACL Configuration dialog box.

The Deploy to Products - Layer 2 ACL dialog box displays. To save the configuration, refer to “Saving a security configuration deployment” on page 631

Editing a standard Layer 2 ACL configuration (Fabric OS)

To create a standard Layer 2 ACL configuration on a Fabric OS device, complete the following steps.

1.Select the device and select Configure > Security > Layer 2 ACL > Product. The Device_Name - Layer 2 ACL Configuration dialog box displays.

2.Select the ACL you want to edit in the ACLs list and click Edit.

The Configuration_Name Edit Standard Layer 2 ACL Configuration dialog box displays.

3.To edit an existing ACL rule, complete the following steps.

a.Select the rule you want to edit in the ACL Entries list and click the left arrow button.

b.Complete step 5 through step 9 in “Creating a standard Layer 2 ACL configuration (Fabric OS)” on page 569.

The updated ACL entry displays in the ACL Entries list. To edit additional ACL entries, repeat step 3.

4.To add a new ACL rule, complete step 4 through step 9 in “Creating a standard Layer 2 ACL configuration (Fabric OS)” on page 569.

The new ACL entry displays in the ACL Entries list. To add additional ACL entries, repeat step 4.

5.To delete an existing ACL rule, select the rule you want to edit in the ACL Entries list and click the left arrow button.

6.Click OK on the Edit - Layer 2 ACL Configuration dialog box.

The updated ACL configuration displays in the ACLs list. To edit additional ACLs, repeat step 2 through step 4.

7.Click OK on the Device_Name - Layer 2 ACL Configuration dialog box.

The Deploy to Products - Layer 2 ACL dialog box displays. To save the configuration, refer to “Saving a security configuration deployment” on page 631

Copying a standard Layer 2 ACL configuration (Fabric OS)

To copy a standard Layer 2 ACL configuration on a Fabric OS device, complete the following steps.

1.Select the device and select Configure > Security > Layer 2 ACL > Product. The Device_Name - Layer 2 ACL Configuration dialog box displays.

2.Select the ACL you want to duplicate in the ACLs list and click Duplicate.

570	Brocade Network Advisor IP User Manual
	53-1003056-01