Brocade Communications Systems IP250 user manual Adding third-party device MIB objects manually

IP historical performance monitoring 33

Adding third-party device MIB objects manually

To add a third-party device MIB object manually, complete the following steps.

1.Copy the third-party device MIB objects to the Install_Home\conf\mibs\ip directory.

2.Go to Install_Home\conf\mibs and open the mibs_to_compile.txt file in a text editor.

3.Add the MIB file names to the mibs_to_compile.txt file.

4.Save and close the mibs_to_compile.txt file.

5.Launch the MIB Objects dialog box to view the third-party device MIB objects. Refer to “Adding or editing a historical data collector” on page 998.

Configuring a MIB walk instance

To configure a MIB walk instance, complete the following steps.

1.Launch the MIB Index dialog box. Refer to “Adding or editing a historical data collector” on page 998.

2.Select an MIB object from the MIB Instance list and click MIB Walk.

The MIB Walk dialog box displays all existing instances of the selected MIB on the selected product.

FIGURE 410 MIB Walk dialog box

3.Select an instance from the list and click Add Instances to add the selected index to the list.

4.Select an instance from the list and click Set Instances to override the existing index with the selected index.

5.Click Close to close the MIB Walk dialog box.

Duplicating a historical data collector

You can create a new data collector by duplicating an existing data collector, changing the name, and editing any values in the duplicate that you want to change.

Brocade Network Advisor IP User Manual	1005
53-1003056-01