Brocade Communications Systems IP250 user manual 1137

Viewing a policy monitor report 36

Fabric checks include the following options:

Check zoning is enabled

Check that all zones belong to at least one zone configuration

Check the number of initiator ports zoned to each storage port is less than Configured_Value. This check provides the following additional detail for this check:

-Storage Port — WWN of the storage port.

-Initiator Count — Number of initiator ports zoned to the storage port.

-Initiator Port — WWN of the initiator port.

-Zone — Zone name containing the initiator/storage port zoning pair.

Check zones that do not contain any online member. This check lists the zones that contain only offline members.

Ethernet Fabric — Checks that all profiles are the same on each RBridge in an Ethernet fabric. This check provides the following additional detail for this check:

-Profile — Name of the profile.

-Status — Whether the profile matched (Passed) or did not match (Failed).

-RBridge ID (Matching Sets) — Number of matching or missing sets. For example, (Missing: 73) (Matching: 2).

Switch Checks — Switch checks provide the following information for each selected check:

Name — Product name.

Status — Result of the check and reason for failure if known. Valid results include Passed, Partially Failed, Failed, Not Applicable, and Unknown.

Switch Checks include the following options:

Switch — Check for HTTPS (secure HTTP) configuration. This check provides the following additional detail for this check:

-HTTPs Status — Whether HTTPS is enabled or disabled on the product.

-HTTP Status — Whether HTTP is enabled or disabled on the product.

Switch — Check if the product is configured to send events to this server.

Switch - Check for SSH (secure Telnet) configuration.This check provides the following additional detail for this check:

-SSH Status — Whether SSH is enabled or disabled on the product.

-Telnet Status — Whether Telnet is enabled or disabled on the product.

Switch - Check for SNMPv3 (secure SNMP) configuration. This check provides the following additional detail for this check:

Brocade Network Advisor IP User Manual	1137
53-1003056-01