Brocade Communications Systems IP250 user manual Configuring devices using the Vpls Manager

VPLS Manager 28

4.If you want to copy the VPLS configurations for one or more products or ports under Discovered Endpoints, select the product or port and then select the Use Discovered Settings check box.

5.Under Available Endpoints, expand the Devices folder to display the available devices. Then expand the device folder, and slot folder to select a port for an endpoint.

6.Use the right arrow button to move the port to the Selected Endpoints box. Make sure you select two endpoints from two different devices.

NOTE

The device folder lists all MPLS capable devices, whether or not they are covered by your MPLS license. If you select an MPLS capable device that in not covered by your MPLS license, you will not be able to configure VPLS services for that device. If you select an endpoint on a device that is not covered by your MPLS license and the device is not in the All MPLS Licensed and Configured Devices group, you see an error message saying that the MPLS device limit will be exceeded.

7.Click Next.

The Device Configuration dialog box displays (Figure 364).

FIGURE 364 VPLS Configuration wizard Device Configuration dialog box

Configuring devices using the VPLS Manager

1.Click each device entry under Devices to determine if there are discovered settings for that device. The last discovered settings for the device are displayed in the Discovered area.

2.Under the Configured area, enter values for the following:

Brocade Network Advisor IP User Manual	889
53-1003056-01