Cisco Systems ATA 188 Audio Configuration Parameters, CodecName, 5-19, Range, Default, Value Type

Chapter 5 Parameters and Defaults

Audio Configuration Parameters

Range

Maximum 31 characters

Default

.

Voice Configuration Menu Access Code

931

Audio Configuration Parameters

:This section contains information about the following parameters:

•CodecName, page 5-19

•AudioMode, page 5-20

•NumTxFrames, page 5-21

CodecName

Description

This parameter specifies the names of the encoder/decoders to use in the LocalConnectionOption parameter. You must list the names in the following order:

•G.711µ-law

•G.711A-law

•G.723.1

•G.729

Note All codec names must be separated by commas with no white space in between. If a name is empty, the default standard-based name is used.

Value Type

Alphanumeric string

Range

The following list shows the maximum number of characters allowed for the respective codec names:

•PCMU—six characters

•PCMA—six characters

•G.723—10 characters

•G.729—eight characters

If a codec name is longer than the maximum, the default standard-based name is used.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)

OL-4803-01 5-19