Cisco Systems ATA 186, ATA 188 ConnectMode, FXSInputLevel, page, Reserved, 5-24, Range, Default

Chapter 5 Parameters and Defaults

Operational Parameters

Range

-9 to 2 dB

Default

-4

Voice Configuration Menu Access Code

371

Related Parameter

FXSInputLevel, page 5-23

ConnectMode

Description

This parameter is a 32-bit bitmap to control the connection mode of the selected call signaling protocol. Table 5-2provides bit definitions for this parameter.

Value Type

Bitmap

Default

0x90000400

Voice Configuration Menu Access Code

311

Table 5-2 ConnectMode Parameter Bit Definitions

Bit Number	Definition
0-1	Reserved.

20—Use the dynamic payload type 126/127 as the RTP payload type (fax pass-through mode) for G.711 µ-law/G.711 A-law.

1—Use the standard payload type 0/8 as the RTP payload type (fax pass-through mode) for G.711 µ-law/G.711 A-law.

	Default: 0
3-6	Reserved.
7	0/1—Disable/enable fax pass-through redundancy.
	Default: 0
8-12	Specifiy the fax pass-through NSE payload type with these bits. The value is the offset to the NSE payload
	base number of 96. The valid range is 0-23; the default is 4.
	For example, if the offset is 4, the NSE payload type is 100.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)

5-24 OL-4803-01