Cisco Systems ATA 188 TraceFlags, SyslogIP, HOSTIPaddress.HOSTPORT, 5-41, Example, Value Type

Chapter 5 Parameters and Defaults

Diagnostic Parameters

Example

If the program prserv.exe is running on a host with IP address 192.168.2.170 and listening port 9001, set NPrintf to 192.168.2.170.9001. This causes the Cisco ATA to send all debug traces to that IP address.

Value Type

Extended IP address

Default

0

Voice Configuration Menu Access Code

81

TraceFlags

Description

This parameter is reserved in MGCP. The Cisco ATA will output all MGCP messages regardless of this parameter value.

Value Type

Bitmap

Default

0x00000000

Voice Configuration Menu Access Code

313

SyslogIP

Description

Use this parameter for diagnostic purposes; specify the IP address and port number to which the Cisco ATA should send its syslog output information.

The program prserv.exe, which is included in all Cisco ATA software upgrade packages, can be used to capture syslog information if you do not have a syslog server.

Syntax

<HOST_IPaddress>.<HOST_PORT>

Example

If you want to send syslog information to the host at IP address 192.168.2.170 and port number 514, do the following:

•Configure the value of this parameter as 192.168.2.170.514

•On your PC, run the command:

prserv 514

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)

OL-4803-01 5-41