Cisco Systems ATA 186, ATA 188 manual 5-28, Bit Number Definition

Chapter 5 Parameters and Defaults

Operational Parameters

Table 5-4 OpFlags Parameter Operational Features to Turn On or Off (continued)

Bit Number Definition

10Reserved.

11If Bit 11=0, the Cisco ATA requests the device hostname from the DHCP server.

If Bit 11=1, the Cisco ATA uses the device hostname that is specified in DHCP option 12. Default: 0

12Reserved.

13If Bit 13=0 (default), use statically configured DNS IP addresses, if available, for name resolution. If statically configured DNS servers are not available, use DHCP-provided DNS IP addresses for name resolution.

If Bit 13=1, use both statically configured DNS IP addresses and as many as two DHCP-provided DNS IP addresses. Therefore, the Cisco ATA can query as many as four DNS IP addresses in one DNS query.

For more information about statically configured DNS IP addresses, see the “DNS1IP” section on page 5-10section and the “DNS2IP” section on page 5-11section.

	Default: 0
14-31	Reserved.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)

5-28 OL-4803-01