HP Book 800CT Appendix E OmniBook Diagnostics Error Messages, Bios flash roms, Fail C-F=XXXX#YYYY

Appendix E - OmniBook Diagnostics Error Messages

The following are messages that may appear when running the OmniBook diagnostics program.

Hewlett-Packard supplied test messages

The following test messages were supplied by Hewlett-Packard.

CPU

XXXMHz CPU, speed=XXX (failed).

BIOS flash roms

OK C-F=XXXX Altera=XXXX Boot=XXXX

FAIL C-F=XXXX#YYYY ...

PCMCIA CARDS (SyCard supplied)

Failed: no extender card

Failed: no SyCard

Voltage Sense 1 (VS1) Error - Stuck Low

Voltage Sense 1 (VS1) Error - Stuck High

Voltage Sense 2 (VS2) Error - Stuck Low

Voltage Sense 2 (VS2) Error - Stuck High Error - INPACK failure

DMA Write Error - expected XX, received XX DMA cycle did not complete:

Timeout error Read Data error Missing TC error Premature TC error Write Data error Unknown DMA error on DMA channel X

DMA Status Check Error - XXXX

DMA Not Complete - 8237A Status = XX

ERROR - Texas Instruments PCI-1130 not found on PCI Bus Socket control r/w error - wrote XX, read back XX @ offset XX Databook Socket control r/w error 2 - wrote XX, read back XX @ offset XX Basic 8 bit I/O read/write failure, wrote XX, read XX

Basic 16 bit I/O read/write failure, wrote XXXX, read XXXX

Basic 16 bit common memory R/W failure, wrote XXXX, read XXXX 16 bit memory read error, wrote 4321, read XXXX

Data Error, expected XXXX, received XXXX Vcc tolerance error (3.3V) = N.NN)

Vcc tolerance error (5V) = N.NN) Vpp2 tolerance error (12V) = N.NN) Vpp1 tolerance error (3.3V) = N.NN) Vpp1 tolerance error (5V) = N.NN) Vpp2 tolerance error (3.3V) = N.NN) Vpp2 tolerance error (5V) = N.NN) Vpp1 tolerance error (0V) = N.NN) Vpp2 tolerance error (0V) = N.NN)

87