HP Book 800CT manual Intel Inside Sticker Placement

Intel Inside	Intel Inside
Sticker for	Sticker for
F1360 only	F1171 - F1175
(p/n 7121-7455)	(p/n 5182-5113)

Figure 36 - Intel Inside Sticker Placement

2.Thread the Display Flex Cable(s) of the replacement Display through the opening in the Top Case and “close” the assembly comprising of the Top Case and Display Assembly.

3.Firmly place the Display Flex Cables(s) into the connector(s) on the Logic PCA.

4.Snap the Top Case and Display assembly in place and replace the keyboard support screws.

Note – For F1360 only, the two long screws MUST be replaced before the short screw.

CAUTION: Use care when replacing the top case and display assembly so as not to pinch the display flex cables between the top case I/O backplane. Always inspect the back seam of the OmniBook to ensure the cables are not pinched.

5. Replace the remainder of the components and reboot.

66