HP Book 800CT manual Inserting the Hard Drive

CAUTION: Do not force the drive into the connector or the pins may bend and cause damage to the hard drive.

Figure 24 - Inserting the Hard Drive

4.Holding the Keyboard in place, so as not to damage the flex cables, turn the OmniBook over and re-insert the three hard drive screws removed in step one. Note, it may be necessary to support the hard drive with one hand in order for the screws to engage.

CAUTION: Do not over-tighten the hard drive screws—screw just until you feel resistance (1.7 in.-lbs.). If the screws are over-tightened, the HDD may not function properly.

5.Fold the Keyboard in place and tuck the Keyboard Flex Cables into the frame of the OmniBook. See Figure 25.

CAUTION: To avoid damage to the keyboard flex cables, they must be positioned properly in the OmniBook frame.

Figure 25 - Proper Keyboard Flex Cable Position

56