HP Book 800CT manual Securely into the zero insertion force connectors, Under the keyboard

5.Lastly, remove the keyboard flex cables from the zero insertion force slots. If available, use the provided Keyboard Flex Cable Removal Tool (part number 5182-7482) to assist in “opening” the zero insertion force slots. Otherwise, a pick may be used to gently lift up the top of the slots. See Figure 30.

CAUTION: To avoid damage to the solder joints, do not open the zero force insertion connectors by prying against the case of the OmniBook.

Figure 30 - Keyboard Flex Cables

Replacement Procedure

1.To replace, reverse the Removal Procedure. Once reconnected, the keyboard flex cables must be tucked properly into the frame. See Figure 31.

CAUTION:	To ensure a proper connection, be sure to place the keyboard flex cables
	securely into the zero insertion force connectors.
	To avoid damage to the keyboard flex cables, do not allow them to fold
	under the keyboard.

Figure 31 - Keyboard Flex Cable Placement

61