PCMCIA Type III extender card

The PCMCIA test that makes use of SyCard Technology’s SyCard also requires an extender card modified with two jumpers or with solder bridges. In order for the Sycard to be detected, CD1- and GND must be shorted together, and GND with CD2- must also be shorted together.

These are both pairs of endmost pins on the extender. Once these jumpers or solder bridges are added, the SyCard will successfully be detected and the SyCard tests can be performed. See Figure 8.

Solder Bridges

Figure 8 - SyCard Solder Bridges

11

Page 29
Image 29
HP Book 800CT manual Pcmcia Type III extender card, SyCard Solder Bridges