Mitsubishi Electronics FL7000 user manual Connectors, Dimension drawings unit mm, Real mode

Specifications (continued)

Specification of RGB signals in each computer mode of the projector (continued)

Important:

•Some computers aren’t compatible with the projector.

•The projector’s maximum resolution is 1920 x 1080 pix- els. It may not display images of higher resolutions than 1920 x 1080 correctly.

•Images with SYNC on G (Green) signal may jitter.

•Images with SYNC on G (Green) signal may be tinged with green.

•If the resolution and frequency of your computer aren’t shown on the table, find the compatible resolution and frequency by changing the resolution of your computer.

•TV60 and TV50 are equivalent to 480i and 576i respectively. When these signals are supplied to the VIDEO IN or S-VIDEO IN terminal, the signal mode is indicated as TV60 or TV50. When they are supplied to the COMPUTER/COMPONENT VIDEO IN terminals, the signal mode is indicated as 480i or 576i.

•When a certain signal such as SXGA85, SXGA85b and UXGA60 is input, the number of displayed colors may decrease depending on the setting of ASPECT in the FEATURE menu. Change the signal format of the computer, if necessary.

REAL mode

When moire patterns or lines of uneven thickness appear on the projected image, these symptoms may be improved by displaying it in its original image size (REAL mode). To display the image in the REAL mode, set ASPECT of the FEATURE menu to REAL. (See page 23 for menu setting.)

•In the REAL mode, you cannot change the magnification factor and magnification range.

•Images of which resolution is larger than the panel resolu- tion cannot be displayed in the REAL mode.

•In the REAL mode, images are black-framed when the image resolution is lower than the panel resolution.

•This projector doesn’t support 480p signals from video devices having 4 lines (R, G, B, CS*) or having 5 lines (R, G, B, H, V).

* : Composite Sync

Connectors

COMPUTER/COMPONENT VIDEO IN 2	COMPUTER/COMPONENT VIDEO
(Mini D-SUB 15-pin)	DVI-D (HDCP)(DVI-D 24-pin) 24 17

SERIAL (D-SUB 9-pin)				5	1
5	1										16					9
							Pin No.	Spec.
9			6	10		6	1	R(RED)/PR/CR
							2	G(GREEN)/Y				8			1
							3	B(BLUE)/PB/CB
				15	11				Pin No.	Spec.	Pin No.			Spec.
							4	GND
Pin No.	Name			I/O					1	TMDS DATA 2-	13	-
1	-			-			5	GND	2	TMDS DATA 2+	14		+5V Power
2		TXD		IN			6	GND	3	TMDS DATA 2 Shield	15	Ground (for +5V)
3		RXD		OUT			7	GND	4	-	16	Hot Plug Detect
4	-			-			8	GND	5	-	17	TMDS DATA 0-
5	GND			-			9	DDC 5V	6	DDC Clock	18	TMDS DATA 0+
6	-			-			10	GND	7	DDC Data	19	TMDS DATA 0 Shield
7	-			-			11	GND	8	-	20	-
8	-			-			12	DDC Data	9	TMDS DATA 1-	21	-
9	-			-			13	HD/CS	10	TMDS DATA 1+	22	TMDS Clock Shield
							14	VD	11	TMDS DATA 1 Shield	23	TMDS Clock+
							15	DDC Clock	12	-	24	TMDS Clock-

Dimension drawings (unit: mm)

Without terminal cover With terminal cover

434

434

103
131.5	371

207

434

	207
103
131.5	443

434

EN-47