NOTE: Press MODE to switch the Watch display to any other mode while the chronograph continues to run. The stopwatch icon will appear to indicate the chronograph is still functioning.
TO OPERATE CHRONOGRAPH MODE MANUALLY
1.Press MODE until Chronograph Mode appears.
2.Press START/SPLIT to begin timing.
3.Press START/SPLIT again to take a split and automatically begin timing a new lap.
The Watch stores lap and split information and displays average statistics for the lap if you are using the Fitness Sensors.
4.Press MODE to immediately display new lap information
OR
Wait for a few seconds and the Watch will automatically begin to display data for a new lap.
5.Press STOP/RESET to stop timing when you reach the end of your activity.
6.Press START/SPLIT to continue timing.
OR
Press and hold STOP/RESET to reset the chronograph display to zero.
TO OPERATE CHRONOGRAPH MODE HANDS-FREE
You can set Chronograph Mode to start when you begin moving and to stop when you stop moving or to automatically take splits based on either distance or elapsed time. See
TO VIEW PERFORMANCE DATA IN CHRONOGRAPH MODE
When using Fitness Sensors with your Watch, scroll through performance data by pressing and releasing DISPLAY.
Performance data viewing options for Chronograph Mode include:
ϖHeart Rate: Current heart rate (requires HR Sensor).
ϖSpeed: Current velocity (requires
ϖAverage Speed: Average velocity for the period that chronograph has been running (requires
ϖPace: Current velocity, expressed in minutes per selected distance unit, such as miles or kilometers (requires
ϖAverage Pace: Average
ϖDistance: Distance traveled since the chronograph was started (requires
ϖAltitude: Current height above sea level (requires
28 | 29 |
