
Navigate Mode functions
Navigate Mode displays directional information and tracks your speed, distance, and altitude during an activity. While you can set up to 10 waypoints to mark specific locations during your activity, this mode does not operate like a compass. You must be moving for accurate heading information.
In addition, Navigate Mode does not operate in conjunction with the chronograph. This mode displays and automatically updates current positional information, but does not keep time.
NOTE: Navigate Mode will not operate without the use of the
TO OPERATE NAVIGATE MODE
1.Press MODE until Navigate Mode appears.
2.Begin moving. The Watch automatically updates the information displayed on the Watch.
If you stop moving the altitude and heading values freeze.
TO STORE WAYPOINTS IN NAVIGATE MODE
For Navigate Mode, you can only store waypoints. For all other waypoints options, you must use Waypoints Mode.
For instructions on storing waypoints, refer to ÒTo store a waypointÓ on page 42.
TO VIEW PERFORMANCE DATA IN NAVIGATE MODE
When using Fitness Sensors with your Watch, scroll through performance data by pressing and releasing DISPLAY.
All data in Navigate Mode requires the
ϖLongitude: East/West position expressed in degrees, minutes, and seconds from the Greenwich Meridian.
ϖLatitude: North/South position expressed in degrees, minutes, and seconds from the equator.
ϖHeading: The direction you are traveling.
ϖSpeed: Current velocity.
ϖDistance: Distance traveled since the activation of the
ϖAltitude: Current height above sea level.
38 | 39 |