Timex W-184 manual Finish Mode functions, To SET Finish Mode

Finish Mode

INDIGLO¨	View performance
night-light	data
To Navigate Mode
or hold for time
Start timing or	Stop timing
take a split.

Finish Mode functions

Finish Mode allows you to predict how much time it will take you to finish a specified distance based on current GPS-3D Sensor data. To help you stay on pace for your predicted finish, you can also set the Watch to alert you if you are moving either too quickly or too slowly for your desired pace.

NOTE: If you do not use the GPS-3D Sensor, Finish Mode operates identically to Chronograph Mode, displaying only time and lap information.

You must reset the chronograph to zero prior to operating Finish Mode or it will not operate properly.

TO SET FINISH MODE

For instructions on setting Watch functions, including Finish Mode, refer to page 13, ÒTo set Watch functions.Ó

For Finish Mode, you can set the following values:

ϖPre-set or custom distance [(for custom set the distance (up to 999.99) and the unit (NM, KM, or MI)]

ϖTarget time

ϖAlert option (an audible alert will cause the Watch to both beep and flash the predicted finish time and a silent alert will only flash the predicted finish time)

TO VIEW PERFORMANCE DATA IN FINISH MODE

When using Fitness Sensors with your Watch, scroll through performance data by pressing and releasing DISPLAY.

Performance data viewing options for Finish Mode include:

ϖFinish Time: The predicted finish time based on your current speed and distance. The finish time will flash if you move slower or quicker than your predicted finish time. If you stop moving, the Watch replaces the finish time with STOPPED. (requires GPS-3D Sensor)

ϖPace: Current velocity, expressed in minutes per selected distance unit, such as miles or kilometers (requires GPS-3D Sensor).

34 35