TP-Link TL-WA7510N manual AP Router Mode

TL-WA7510N

5GHz 150Mbps Outdoor Wireless Access Point User Guide

3.2.2 AP Router Mode

When you choose AP Router Mode on Operation Mode page in Figure 3-10,take the following steps:

1.Click Next in Figure 3-10,and then WAN Connection Type page will appear as shown in Figure 3-19.

Figure 3-19

¾Auto Detect - If you don't know the connection type your ISP provides, use this option to allow the Quick Setup to search your Internet connection for servers as well as protocols, and to determine your ISP configuration. Make sure the cable is securely plugged into the WAN port before detection. The appropriate configuration page will be displayed when an active Internet service is successfully detected by the Device.

If you choose Auto Detect in Figure 3-19and then click Next, Figure 3-20will appear.

Figure 3-20

¾PPPoE - If you have applied ADSL to realize Dial-up service, you should choose this type. In this condition, you should fill in both the User Name and Password that your ISP provides.

1)If you choose PPPoE in Figure 3-19and then click Next, Figure 3-21will appear.

27