TP-Link TL-WA7510N manual 5GHz 150Mbps Outdoor Wireless Access Point User Guide

TL-WA7510N

5GHz 150Mbps Outdoor Wireless Access Point User Guide

Figure 4-35 SNMP Settings

¾SNMP Agent - Choose Enable to open this function if you want to have remote control through SNMPv1/v2 agent with MIB-II. Choose Disable to close this function.

¾SysContact - The textual identification of the contact person for this managed node.

¾SysName - An administratively-assigned name for this managed node.

¾SysLocation - The physical location of this node.

)Note:

Specifying one of these values via the Device's Web-Based Utility makes the corresponding object read-only. If there isn't such a config setting, then the write request will succeed (assuming suitable access control settings), but the new value would be forgotten the next time the agent was restarted.

¾Get Community - Enter the community name that allows Read-Only access to the Device's SNMP information. The community name can be considered a group password. The default setting is public.

¾Get Source - Defines the IP address or subnet for management systems that can read information from this 'get' community device.

¾Set Community - Enter the community name that allows Read/Write access to the Device's SNMP information. The community name can be considered a group password. The default setting is private.

¾Set Source - Defines the IP address or subnet for management systems that can control this 'set' community device.

66