
¾Disable Security- The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Device without encryption. It is recommended strongly that you choose one of the following options to enable security.
¾
¾PSK Password- You can enter ASCII or Hexadecimal characters. For ASCII, the length should be between 8 and 63 characters.
For Hexadecimal, the length should be between 8 and 64 characters. Please note that the key is case sensitive.
¾Not Change- If you chose this option, wireless security configuration will not change.
2.Wireless settings in AP Client Router mode
Figure 5-27 Wireless Settings in AP Client Router mode
¾SSID - The SSID of the AP your Device is going to connect to as a client. You can also use the search function to select a SSID to join.
¾BSSID - The BSSID of the AP your Device is going to connect to as a client. You can also use the search function to select a BSSID to join.
¾Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Device can be used. It may be illegal to use the wireless function of
99